Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001510C
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 -           ]
Title: A25A-FXS (ENGINE CONTROL): ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION; 2018 - 2024 MY Camry HV [07/2017 -        ]

INSTALLATION

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

HINT:

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click here 2018 MY Camry HV [07/2017 - 09/2018]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION 2019 MY Camry HV [09/2018 - 09/2019]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION 2020 MY Camry HV [09/2019 - 10/2020]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION 2021 - 2024 MY Camry HV [10/2020 -        ]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION

(a) Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.

(b) Install the engine coolant temperature sensor to the water outlet with a new clip.

NOTICE:

  • If the engine coolant temperature sensor has been struck or dropped, replace it.
  • If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.
  • Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.

(c) Connect the engine coolant temperature sensor connector.

2. INSTALL INVERTER WITH CONVERTER ASSEMBLY

Click here 2018 - 2024 MY Camry HV [07/2017 -        ]; HYBRID / BATTERY CONTROL: INVERTER WITH CONVERTER: INSTALLATION

3. INSTALL NO. 2 ENGINE COOLANT TEMPERATURE SENSOR

(a) Apply a light coat of engine coolant to the O-ring of the No. 2 engine coolant temperature sensor.

(b) Install the No. 2 engine coolant temperature sensor to the radiator pipe with a new clip.

NOTICE:

  • If the No. 2 engine coolant temperature sensor has been struck or dropped, replace it.
  • If reusing the No. 2 engine coolant temperature sensor, be sure to inspect the O-ring.
  • Make sure that the O-ring is not cracked or moved out of place when installing the No. 2 engine coolant temperature sensor.

(c) Connect the No. 2 engine coolant temperature sensor connector.

4. INSTALL INLET AIR CLEANER ASSEMBLY

Click here 2018 - 2024 MY Camry HV [07/2017 -        ]; HYBRID / BATTERY CONTROL: INVERTER WITH CONVERTER: INSTALLATION+

5. INSTALL COOL AIR INTAKE DUCT SEAL

Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION+ 2021 - 2024 MY Camry HV [10/2020 -        ]; EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION+

6. ADD ENGINE COOLANT

Click here 2018 - 2024 MY Camry HV [07/2017 -        ]; MAINTENANCE: COOLANT (for Engine): REPLACEMENT+

7. INSPECT FOR COOLANT LEAK

Click here 2018 - 2024 MY Camry HV [07/2017 -        ]; A25A-FXS (COOLING): COOLING SYSTEM: ON-VEHICLE INSPECTION+

8. PERFORM INITIALIZATION

(a) Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click here 2018 MY Camry HV [07/2017 - 09/2018]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION 2019 MY Camry HV [09/2018 - 09/2019]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION 2020 MY Camry HV [09/2019 - 10/2020]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION 2021 - 2024 MY Camry HV [10/2020 -        ]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION