| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001509P |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - 10/2020] |
| Title: PARKING BRAKE: ELECTRIC PARKING BRAKE SYSTEM: FREEZE FRAME DATA; 2018 - 2020 MY Camry HV [07/2017 - 10/2020] | ||
FREEZE FRAME DATA
FREEZE FRAME DATA
HINT:
- When a DTC is stored, the freeze frame data stores the current vehicle (sensor) state as.
- The freeze frame data cannot be cleared or updated until the recorded DTCs are cleared.
(a) Using the Techstream, the state of the vehicle (sensors) when the system is operating or when a DTC was stored can be checked.
Chassis > Electric Parking Brake
|
Tester Display |
Measurement Item |
Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
FR Speed Sensor Open |
Front speed sensor RH open detection |
Normal or Error |
Normal: Normal |
- |
|
FL Speed Sensor Open |
Front speed sensor LH open detection |
Normal or Error |
Normal: Normal |
- |
|
RR Speed Sensor Open |
Rear speed sensor RH open detection |
Normal or Error |
Normal: Normal |
- |
|
RL Speed Sensor Open |
Rear speed sensor LH open detection |
Normal or Error |
Normal: Normal |
- |
|
EFI ECU Communication Open |
ECM communication open detection |
Normal or Error |
Normal: Normal |
- |
|
Deceleration Sensor Open |
Deceleration sensor (airbag sensor assembly) communication open detection |
Normal or Error |
Normal: Normal |
- |
|
HV ECU Communication Open |
Hybrid vehicle control ECU assembly communication open detection |
Normal or Error |
Normal: Normal |
- |
|
Body ECU Communication Open |
Main body ECU (multiplex network body ECU) communication open detection |
Normal or Error |
Normal: Normal |
- |
|
Brake ECU Communication Open |
Skid control ECU (brake booster with master cylinder assembly) communication open detection |
Normal or Error |
Normal: Normal |
- |
|
A/C ECU Communication Open |
Air conditioning amplifier assembly communication open detection |
Normal or Error |
Normal: Normal |
- |
|
Navigation ECU Communication Open |
Radio and display receiver assembly communication open detection |
Normal or Error |
Normal: Normal |
w/ Navigation Antenna Assembly |
|
Stop and Start ECU Communication Open |
- |
- |
- |
Although the item is displayed on the Techstream, it is not applicable to this vehicle |
|
Deceleration Sensor Open (EPB) |
Acceleration sensor open detection |
Normal or Error |
Normal: Normal |
HINT: EPB stands for electric parking brake. |
|
FR Wheel Speed |
Front wheel speed sensor RH reading |
0.0 to 326.4 km/h (0 to 202 mph) |
When vehicle is stopped: 0 km/h (0 mph) When driving vehicle: Changes according to vehicle speed (when vehicle speed is constant, there are no big changes in vehicle speed display) |
When not normal, front speed sensor RH system and CAN communication may be malfunctioning |
|
FL Wheel Speed |
Front wheel speed sensor LH reading |
0.0 to 326.4 km/h (0 to 202 mph) |
When vehicle is stopped: 0 km/h (0 mph) When driving vehicle: Changes according to vehicle speed (when vehicle speed is constant, there are no big changes in vehicle speed display) |
When not normal, front speed sensor LH system and CAN communication may be malfunctioning |
|
RR Wheel Speed |
Rear wheel speed sensor RH reading |
0.0 to 326.4 km/h (0 to 202 mph) |
When vehicle is stopped: 0 km/h (0 mph) When driving vehicle: Changes according to vehicle speed (when vehicle speed is constant, there are no big changes in vehicle speed display) |
When not normal, rear speed sensor RH system and CAN communication may be malfunctioning |
|
RL Wheel Speed |
Rear wheel speed sensor LH reading |
0.0 to 326.4 km/h (0 to 202 mph) |
When vehicle is stopped: 0 km/h (0 mph) When driving vehicle: Changes according to vehicle speed (when vehicle speed is constant, there are no big changes in vehicle speed display) |
When not normal, rear speed sensor LH system and CAN communication may be malfunctioning |
|
Deceleration Sensor 1 |
Deceleration sensor (airbag sensor assembly) 1 input signal |
-18.300 to 18.318 m/s2 |
When vehicle is stopped: 0 m/s2 When driving vehicle: Continuously changes |
When not normal, deceleration sensor (airbag sensor assembly) system and CAN communication may be malfunctioning |
|
Deceleration Sensor 2 |
Deceleration sensor (airbag sensor assembly) 2 input signal |
-18.300 to 18.318 m/s2 |
When vehicle is stopped: 0 m/s2 When driving vehicle: Continuously changes |
When not normal, deceleration sensor (airbag sensor assembly) system and CAN communication may be malfunctioning |
|
Forward and Rearward G |
Deceleration sensor (airbag sensor assembly) input signal |
-18.300 to 18.318 m/s2 |
When vehicle is stopped: 0 m/s2 When driving vehicle: Changes according to increase or decrease in speed |
When not normal, deceleration sensor (airbag sensor assembly) system and CAN communication may be malfunctioning |
|
Zero Point of Deceleration Sensor |
Deceleration sensor (airbag sensor assembly) zero point |
-4.595 to 4.559 m/s2 |
- |
- |
|
Zero Point of Deceleration Sensor 2 |
Deceleration sensor (airbag sensor assembly) 2 zero point |
-4.595 to 4.559 m/s2 |
- |
- |
|
Vehicle Speed |
Vehicle speed |
0.0 to 326.4 km/h (0.0 to 202.8 mph) |
When vehicle is stopped: 0 km/h (0 mph) When driving vehicle: Changes according to vehicle speed (when vehicle speed is constant, there are no big changes in vehicle speed display) |
When not normal, speed sensor system and CAN communication may be malfunctioning |
|
ECU +B1 Voltage |
Skid control ECU (brake booster with master cylinder assembly) +B1 voltage |
0.00 to 20.00 V |
11 to 14 V |
- |
|
ECU +B2 Voltage |
Skid control ECU (brake booster with master cylinder assembly) +B2 voltage |
0.00 to 20.00 V |
11 to 14 V |
- |
|
RH Actuator Motor +Terminal Voltage |
Parking brake motor RH (parking brake actuator assembly RH) positive (+) terminal side voltage |
0.00 to 20.00 V |
- |
- |
|
RH Actuator Motor -Terminal Voltage |
Parking brake motor RH (parking brake actuator assembly RH) negative (-) terminal side voltage |
0.00 to 20.00 V |
- |
- |
|
LH Actuator Motor +Terminal Voltage |
Parking brake motor LH (parking brake actuator assembly LH) positive (+) terminal side voltage |
0.00 to 20.00 V |
- |
- |
|
LH Actuator Motor -Terminal Voltage |
Parking brake motor LH (parking brake actuator assembly LH) negative (-) terminal side voltage |
0.00 to 20.00 V |
- |
- |
|
Stop Light Switch |
Stop light switch assembly |
OFF or ON |
OFF: Brake pedal released ON: Brake pedal depressed |
- |
|
EPB Switch |
Electric parking brake switch (electric parking brake switch assembly) input |
OFF, Lock, Release or Unknown |
OFF: Lock switch and release switch are off Lock: Lock switch on Release: Release switch on |
When not normal, electric parking brake switch (electric parking brake switch assembly) release side system may be malfunctioning HINT: EPB stands for electric parking brake. |
|
Auto Mode Request |
Auto mode request status |
OFF or ON |
- |
- |
|
Shift Position |
Position of shift lever |
P, N, R, D or Unknown |
P: Shift lever in P N: Shift lever in N R: Shift lever in R D: Shift lever in D or B |
When not normal, shift position signal system may be malfunctioning |
|
IG Switch |
IG power source status |
OFF or ON |
OFF: IG power source voltage is not input to Skid control ECU (brake booster with master cylinder assembly) ON: IG power source voltage is input to Skid control ECU (brake booster with master cylinder assembly) |
- |
|
Brake Hold Ready |
Brake hold control permission status |
OFF or ON |
- |
- |
|
Brake Hold Control Mode |
Brake hold control mode |
OFF, ON, Release or EPB |
OFF: Brake hold control is not operating ON: Brake hold control is operating Release: Brake hold control is released EPB: Parking brake is locked during brake hold control |
HINT: EPB stands for electric parking brake. |
|
EPB Lock Request |
Lock demand status |
OFF or ON |
OFF: Not requested ON: Requested |
HINT: EPB stands for electric parking brake. |
|
FR Speed Signal Status |
FR speed signal status |
Normal or Stuck |
Normal |
- |
|
FL Speed Signal Status |
FL speed signal status |
Normal or Stuck |
Normal |
- |
|
RR Speed Signal Status |
RR speed signal status |
Normal or Stuck |
Normal |
- |
|
RL Speed Signal Status |
RL speed signal status |
Normal or Stuck |
Normal |
- |
|
RH Actuator Current Status |
Parking brake actuator assembly RH monitoring current condition |
Inval or Valid |
Valid |
- |
|
LH Actuator Current Status |
Parking brake actuator assembly LH monitoring current condition |
Inval or Valid |
Valid |
- |
|
RH Actuator Nut Stroke |
Parking brake actuator assembly RH nut stroke value |
0.000 to 8.160 mm (0.000 to 0.321 in.) |
- |
- |
|
LH Actuator Nut Stroke |
Parking brake actuator assembly LH nut stroke value |
0.000 to 8.160 mm (0.000 to 0.321 in.) |
- |
- |
|
RH Actuator Motor Actual Current |
Parking brake motor RH (parking brake actuator assembly RH) current value |
-5.0362 to 50.5000 A |
- |
- |
|
RH Actuator Motor Adjustment Current |
Parking brake motor RH (parking brake actuator assembly RH) current calibration value |
-6.9690 to 6.9140 A |
- |
- |
|
RH Actuator 0 load Current |
Parking brake actuator assembly RH current value with no load |
-5.0362 to 50.5000 A |
- |
- |
|
LH Actuator Motor Actual Current |
Parking brake motor LH (parking brake actuator assembly LH) current value |
-5.0362 to 50.5000 A |
- |
- |
|
LH Actuator Motor Adjustment Current |
Parking brake motor LH (parking brake actuator assembly LH) current calibration value |
-6.9690 to 6.9140 A |
- |
- |
|
LH Actuator 0 load Current |
Parking brake actuator assembly LH current value with no load |
-5.0362 to 50.5000 A |
- |
- |
|
Counter of IG ON After EPB Control Cancel |
Number of times the power switch was turned on (IG) after EPB control was canceled |
0 to 255 Times |
- |
- |
|
RH Actuator Status |
Parking brake actuator assembly RH condition |
Default, Lock, Lock Dynamic, Release, Lock Faulty, Unexpected, Lock Standby, Release Standby, Lock Dynamic Standby, Release Dynamic Standby, Lock Dynamic Faulty, Lock Standard Control, Lock Dynamic Control, Lock Control for Prevention Loosen by High Temperature, Lock Control for Prevention Slipping Down, Re-Lock Control by Switch, Recovery Lock Control, Lock Control After Dynamic PKB, Release Standard Control, Release Dynamic Control, Full Release Control |
- |
- |
|
LH Actuator Status |
Parking brake actuator assembly LH condition |
Default, Lock, Lock Dynamic, Release, Lock Faulty, Unexpected, Lock Standby, Release Standby, Lock Dynamic Standby, Release Dynamic Standby, Lock Dynamic Faulty, Lock Standard Control, Lock Dynamic Control, Lock Control for Prevention Loosen by High Temperature, Lock Control for Prevention Slipping Down, Re-Lock Control by Switch, Recovery Lock Control, Lock Control After Dynamic PKB, Release Standard Control, Release Dynamic Control, Full Release Control |
- |
- |
|
RH Actuator Motor Current Differential |
Differences in parking brake motor RH (parking brake actuator assembly RH) monitoring current |
-1.008 to 0.945 A |
- |
- |
|
LH Actuator Motor Current Differential |
Differences in parking brake motor LH (parking brake actuator assembly LH) monitoring current |
-1.008 to 0.945 A |
- |
- |
|
Detailed Freeze DTC |
Number of detailed freeze DTCs |
0 to 65535 |
- |
- |
|
RH Actuator Motor Gradient Current |
Parking brake motor RH (parking brake actuator assembly RH) current gradient |
-5.0362 to 50.5000 A |
- |
- |
|
LH Actuator Motor Gradient Current |
Parking brake motor LH (parking brake actuator assembly LH) current gradient |
-5.0362 to 50.5000 A |
- |
- |
|
RH Actuator Motor Relay1 |
Parking brake motor relay 1 RH condition |
OFF or ON |
- |
- |
|
RH Actuator Motor Relay2 |
Parking brake motor relay 2 RH condition |
OFF or ON |
- |
- |
|
RH Actuator Motor Relay3 |
Parking brake motor relay 3 RH condition |
OFF or ON |
- |
- |
|
RH Actuator Motor Relay4 |
Parking brake motor relay 4 RH condition |
OFF or ON |
- |
- |
|
LH Actuator Motor Relay1 |
Parking brake motor relay 1 LH condition |
OFF or ON |
- |
- |
|
LH Actuator Motor Relay2 |
Parking brake motor relay 2 LH condition |
OFF or ON |
- |
- |
|
LH Actuator Motor Relay3 |
Parking brake motor relay 3 LH condition |
OFF or ON |
- |
- |
|
LH Actuator Motor Relay4 |
Parking brake motor relay 4 LH condition |
OFF or ON |
- |
- |
|
RH Actuator Motor Current High |
Parking brake motor RH (parking brake actuator assembly RH) overcurrent |
OFF or ON |
- |
- |
|
RH Actuator Motor Driver Operation Status |
Parking brake motor RH (parking brake actuator assembly RH) driver status |
OK or NG |
- |
- |
|
LH Actuator Motor Current High |
Parking brake motor LH (parking brake actuator assembly LH) overcurrent status |
OFF or ON |
- |
- |
|
LH Actuator Motor Driver Operation Status |
Parking brake motor LH (parking brake actuator assembly LH) driver status |
OK or NG |
- |
- |
|
|