Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014Z7W
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 -           ]
Title: DOOR / HATCH: FUEL LID OPENER SWITCH: INSPECTION; 2018 - 2024 MY Camry HV [07/2017 -        ]

INSPECTION

PROCEDURE

1. INSPECT FUEL LID OPENER SWITCH

(a) Check the switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

2 - 5

Pressed (ON)

Below 1 Ω

2 - 5

Not pressed (OFF)

10 kΩ or higher

If the result is not as specified, replace the fuel lid opener switch.

*a

Component without harness connected

(Fuel Lid Opener Switch)

(b) Check the switch illumination.

(1) Apply auxiliary battery voltage to the switch connector and check that the fuel lid opener switch illuminates.

OK:

Auxiliary Battery Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 6

Auxiliary battery negative (-) → Terminal 1

Illumination illuminates

If the result is not as specified, replace the fuel lid opener switch.