| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014YPV |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - ] |
| Title: LIGHTING (INT): VANITY LIGHT SWITCH: INSPECTION; 2018 - 2024 MY Camry HV [07/2017 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT VISOR ASSEMBLY LH
|
*a |
Component without harness connected (Visor Assembly LH) |
|
*b |
Visor up |
|
*c |
Visor down |
|
*d |
Mirror Cover |
(a) Inspect the vanity light switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
1 - 2 |
Visor up |
10 kΩ or higher |
|
1 - 2 |
Mirror cover fully closed with visor down |
10 kΩ or higher |
|
1 - 2 |
Mirror cover fully open with visor down |
Below 1 Ω |
If the result is not as specified, replace the visor assembly LH.
2. INSPECT VISOR ASSEMBLY RH
|
*a |
Component without harness connected (Visor Assembly RH) |
|
*b |
Visor up |
|
*c |
Visor down |
|
*d |
Mirror Cover |
(a) Inspect the vanity light switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
1 - 2 |
Visor up |
10 kΩ or higher |
|
1 - 2 |
Mirror cover fully closed with visor down |
10 kΩ or higher |
|
1 - 2 |
Mirror cover fully open with visor down |
Below 1 Ω |
If the result is not as specified, replace the visor assembly RH.
|
|