Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014YO2
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 -           ]
Title: LIGHTING (EXT): HEIGHT CONTROL SENSOR: REMOVAL; 2018 - 2024 MY Camry HV [07/2017 -        ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during rear height control sensor sub-assembly LH removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Rear height control sensor sub-assembly LH

Perform headlight ECU sub-assembly LH initialization

Lighting system (w/ AFS)(EXT)

2018 - 2020 MY Camry HV [07/2017 - 10/2020]; LIGHTING (EXT): LIGHTING SYSTEM (w/ AFS): INITIALIZATION 2021 - 2024 MY Camry HV [10/2020 -        ]; LIGHTING (EXT): LIGHTING SYSTEM (w/ AFS): INITIALIZATION

PROCEDURE

1. REMOVE REAR WHEEL (for LH Side)

Click here 2018 - 2024 MY Camry HV [07/2017 -        ]; TIRE / WHEEL: TIRE AND WHEEL: REMOVAL

2. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

NOTICE:

If the rear height control sensor sub-assembly LH has been struck or dropped, replace it with a new one.

(a) Disconnect the connector.

(b) Remove the 2 bolts.

(c) Disengage the 2 guides to remove the rear height control sensor sub-assembly LH.