| Last Modified: 06-08-2026 | 6.11:8.1.0 | Doc ID: RM1000000014YMW |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - ] |
| Title: LIGHTING (EXT): REAR LIGHT ASSEMBLY: INSPECTION; 2018 - 2024 MY Camry HV [07/2017 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT REAR LIGHT ASSEMBLY LH (for LED Type Back-up Light)
|
*a |
Component without harness connected (Rear Light Assembly LH) |
(a) Apply auxiliary battery voltage to the rear light assembly LH and check that the lights illuminate.
OK
|
Condition |
Specified Condition |
|---|---|
|
Auxiliary battery positive (+) → Terminal 1 (B) Auxiliary battery negative (-) → Terminal 4 (E) |
Taillight illuminates |
|
Auxiliary battery positive (+) → Terminal 2 (B) Auxiliary battery negative (-) → Terminal 4 (E) |
Back-up light illuminates |
If the result is not as specified, replace the rear light assembly LH.
2. INSPECT REAR LIGHT ASSEMBLY RH (for LED Type Back-up Light)
|
*a |
Component without harness connected (Rear Light Assembly RH) |
(a) Apply auxiliary battery voltage to the rear light assembly RH and check that the lights illuminate.
OK
|
Condition |
Specified Condition |
|---|---|
|
Auxiliary battery positive (+) → Terminal 1 (B) Auxiliary battery negative (-) → Terminal 4 (E) |
Taillight illuminates |
|
Auxiliary battery positive (+) → Terminal 2 (B) Auxiliary battery negative (-) → Terminal 4 (E) |
Back-up light illuminates |
If the result is not as specified, replace the rear light assembly RH.
|
|