| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014YMQ |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - ] |
| Title: LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: INSPECTION; 2018 - 2024 MY Camry HV [07/2017 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT REAR COMBINATION LIGHT LED (for Bulb Type Back-up Light)
|
*a |
Component without harness connected (Rear Combination Light LED) |
(a) Apply battery voltage to the rear combination light LED and check that the lights illuminate.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 1 (TL) Battery negative (-) → Terminal 2 (E) |
Taillight illuminates |
|
Battery positive (+) → Terminal 3 (STP) Battery negative (-) → Terminal 2 (E) |
Stop light illuminates |
If the result is not as specified, replace the rear combination light LED.
2. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH (for Bulb Type Back-up Light)
|
*a |
Component without harness connected (Rear Combination Light Assembly LH) |
(a) Apply auxiliary battery voltage to the rear combination light assembly LH and check that the lights illuminate.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Auxiliary battery positive (+) → Terminal 1 (TL) Auxiliary battery negative (-) → Terminal 4 (E) |
Taillight illuminates |
|
Auxiliary battery positive (+) → Terminal 2 (STP) Auxiliary battery negative (-) → Terminal 4 (E) |
Stop light illuminates |
If the result is not as specified, replace the rear combination light assembly LH.
3. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH (for LED Type Back-up Light)
|
*a |
Component without harness connected (Rear Combination Light Assembly LH) |
(a) Apply auxiliary battery voltage to the rear combination light assembly LH and check that the lights illuminate.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Auxiliary battery positive (+) → Terminal 1 (TL) Auxiliary battery negative (-) → Terminal 4 (E) |
Taillight and side marker light illuminate |
|
Auxiliary battery positive (+) → Terminal 2 (STP) Auxiliary battery negative (-) → Terminal 4 (E) |
Stop light illuminates |
|
Auxiliary battery positive (+) → Terminal 3 (B) Auxiliary battery negative (-) → Terminal 4 (E) |
Turn signal light illuminates |
If the result is not as specified, replace the rear combination light assembly LH.
4. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH (for Bulb Type Back-up Light)
|
*a |
Component without harness connected (Rear Combination Light Assembly RH) |
(a) Apply auxiliary battery voltage to the rear combination light assembly RH and check that the lights illuminate.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Auxiliary battery positive (+) → Terminal 1 (TL) Auxiliary battery negative (-) → Terminal 4 (E) |
Taillight illuminates |
|
Auxiliary battery positive (+) → Terminal 2 (STP) Auxiliary battery negative (-) → Terminal 4 (E) |
Stop light illuminates |
If the result is not as specified, replace the rear combination light assembly RH.
5. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH (for LED Type Back-up Light)
|
*a |
Component without harness connected (Rear Combination Light Assembly RH) |
(a) Apply auxiliary battery voltage to the rear combination light assembly RH and check that the lights illuminate.
OK:
|
Condition |
Specified Condition |
|---|---|
|
Auxiliary battery positive (+) → Terminal 1 (TL) Auxiliary battery negative (-) → Terminal 4 (E) |
Taillight and side marker light illuminate |
|
Auxiliary battery positive (+) → Terminal 2 (STP) Auxiliary battery negative (-) → Terminal 4 (E) |
Stop light illuminates |
|
Auxiliary battery positive (+) → Terminal 3 (B) Auxiliary battery negative (-) → Terminal 4 (E) |
Turn signal light illuminates |
If the result is not as specified, replace the rear combination light assembly RH.
|
|