Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014YMQ
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 -           ]
Title: LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: INSPECTION; 2018 - 2024 MY Camry HV [07/2017 -        ]

INSPECTION

PROCEDURE

1. INSPECT REAR COMBINATION LIGHT LED (for Bulb Type Back-up Light)

*a

Component without harness connected

(Rear Combination Light LED)

(a) Apply battery voltage to the rear combination light LED and check that the lights illuminate.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 1 (TL)

Battery negative (-) → Terminal 2 (E)

Taillight illuminates

Battery positive (+) → Terminal 3 (STP)

Battery negative (-) → Terminal 2 (E)

Stop light illuminates

If the result is not as specified, replace the rear combination light LED.

2. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH (for Bulb Type Back-up Light)

*a

Component without harness connected

(Rear Combination Light Assembly LH)

(a) Apply auxiliary battery voltage to the rear combination light assembly LH and check that the lights illuminate.

OK:

Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 1 (TL)

Auxiliary battery negative (-) → Terminal 4 (E)

Taillight illuminates

Auxiliary battery positive (+) → Terminal 2 (STP)

Auxiliary battery negative (-) → Terminal 4 (E)

Stop light illuminates

If the result is not as specified, replace the rear combination light assembly LH.

3. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH (for LED Type Back-up Light)

*a

Component without harness connected

(Rear Combination Light Assembly LH)

(a) Apply auxiliary battery voltage to the rear combination light assembly LH and check that the lights illuminate.

OK:

Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 1 (TL)

Auxiliary battery negative (-) → Terminal 4 (E)

Taillight and side marker light illuminate

Auxiliary battery positive (+) → Terminal 2 (STP)

Auxiliary battery negative (-) → Terminal 4 (E)

Stop light illuminates

Auxiliary battery positive (+) → Terminal 3 (B)

Auxiliary battery negative (-) → Terminal 4 (E)

Turn signal light illuminates

If the result is not as specified, replace the rear combination light assembly LH.

4. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH (for Bulb Type Back-up Light)

*a

Component without harness connected

(Rear Combination Light Assembly RH)

(a) Apply auxiliary battery voltage to the rear combination light assembly RH and check that the lights illuminate.

OK:

Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 1 (TL)

Auxiliary battery negative (-) → Terminal 4 (E)

Taillight illuminates

Auxiliary battery positive (+) → Terminal 2 (STP)

Auxiliary battery negative (-) → Terminal 4 (E)

Stop light illuminates

If the result is not as specified, replace the rear combination light assembly RH.

5. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH (for LED Type Back-up Light)

*a

Component without harness connected

(Rear Combination Light Assembly RH)

(a) Apply auxiliary battery voltage to the rear combination light assembly RH and check that the lights illuminate.

OK:

Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 1 (TL)

Auxiliary battery negative (-) → Terminal 4 (E)

Taillight and side marker light illuminate

Auxiliary battery positive (+) → Terminal 2 (STP)

Auxiliary battery negative (-) → Terminal 4 (E)

Stop light illuminates

Auxiliary battery positive (+) → Terminal 3 (B)

Auxiliary battery negative (-) → Terminal 4 (E)

Turn signal light illuminates

If the result is not as specified, replace the rear combination light assembly RH.