Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014YMH
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 -           ]
Title: LIGHTING (EXT): HEADLIGHT ASSEMBLY: INSTALLATION; 2018 - 2024 MY Camry HV [07/2017 -        ]

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. INSTALL HEADLIGHT ASSEMBLY

(a) w/o AFS:

(1) Connect each connector.

(b) for Bulb Type Turn Signal Light:

(1) Engage the clamp.

(c) w/ AFS:

(1) Connect the connector and raise the connector lock lever to engage the claw and lock the connector as shown in the illustration.

*a

Connector Lock Lever

Connect in this Direction

(d) Engage the guide to temporarily install the headlight assembly as shown in the illustration.

Install in this Direction

(e) Install the headlight assembly with the bolt and 3 screws.

Torque:

Bolt :

7.0 N·m {71 kgf·cm, 62 in·lbf}

*a

Bolt

*b

Screw

(f) Remove the protective tape.

2. INSTALL FRONT BUMPER ASSEMBLY

Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION 2021 - 2024 MY Camry HV [10/2020 -        ]; EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION

3. PERFORM INITIALIZATION (w/ AFS)

Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; LIGHTING (EXT): LIGHTING SYSTEM (w/ AFS): INITIALIZATION 2021 - 2024 MY Camry HV [10/2020 -        ]; LIGHTING (EXT): LIGHTING SYSTEM (w/ AFS): INITIALIZATION

4. ADJUST HEADLIGHT AIMING

Click here 2018 - 2024 MY Camry HV [07/2017 -        ]; LIGHTING (EXT): HEADLIGHT ASSEMBLY: ADJUSTMENT