| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014Y88 |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - 09/2019] |
| Title: CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL; 2018 - 2019 MY Camry HV [07/2017 - 09/2019] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during DCM (telematics transceiver) removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
Replacement of DCM (telematics transceiver) |
DCM activation |
Safety connect system |
|
|
Replacement of DCM (telematics transceiver)* |
Code registration (Smart key System (for Start Function)) |
Smart key system (for Start Function) |
|
- *: for Toyota Entune Remote Connect Compatible Type
PROCEDURE
1. REMOVE NO. 1 METER HOOD CLUSTER
Click here
![2018 - 2024 MY Camry HV [07/2017 - ]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
Click here
3. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Click here
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
Click here
5. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
Click here
6. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for 7 Inch Display)
Click here
7. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 7 Inch Display)
Click here
8. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 8 Inch Display)
Click here
9. REMOVE DCM (TELEMATICS TRANSCEIVER)
|
(a) Disconnect the 5 connectors. |
|
|
(b) Disengage the clamp. |
|
|
(c) Remove the 2 bolts. |
|
|
(d) Disengage the 2 guides in the order shown in the illustration to remove the DCM (telematics transceiver). |
|
|
|