Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014XNF
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 -           ]
Title: HYBRID / BATTERY CONTROL: BATTERY BLOWER: REMOVAL; 2018 - 2024 MY Camry HV [07/2017 -        ]

REMOVAL

PROCEDURE

1. REMOVE REAR SEAT CUSHION ASSEMBLY

Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; SEAT: REAR SEAT ASSEMBLY: REMOVAL+ 2021 - 2024 MY Camry HV [10/2020 -        ]; SEAT: REAR SEAT ASSEMBLY: REMOVAL+

2. REMOVE REAR SEAT CUSHION LOCK HOOK

Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; SEAT: REAR SEAT ASSEMBLY: REMOVAL+ 2021 - 2024 MY Camry HV [10/2020 -        ]; SEAT: REAR SEAT ASSEMBLY: REMOVAL+

3. REMOVE REAR DOOR SCUFF PLATE LH

Click here 2018 MY Camry HV [07/2017 - 09/2018]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+ 2019 MY Camry HV [09/2018 - 09/2019]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+ 2020 MY Camry HV [09/2019 - 10/2020]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+ 2021 MY Camry HV [10/2020 - 08/2021]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+ 2022 - 2024 MY Camry HV [08/2021 -        ]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+

4. REMOVE REAR UNDER SIDE COVER LH

(a) Remove the 2 clips (A).

*a

Clip (A)

*b

Clip (B)

*c

Clip (C)

(b) Disengage the claw, 3 clips (B), 2 clips (C) and guide to remove the rear under side cover LH.

5. REMOVE REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.

6. REMOVE REAR UNDER SIDE COVER RH

(a) Remove the 2 clips (A).

*a

Clip (A)

*b

Clip (B)

*c

Clip (C)

(b) Disengage the claw, 3 clips (B), 2 clips (C) and guide to remove the rear under side cover RH.

7. REMOVE REAR UNDER COVER

(a) Pull the rear under cover in the direction indicated by the arrow (1) shown in the illustration to disengage the 2 clips.

Remove in this Direction (1)

Remove in this Direction (2)

(b) Pull the rear under cover in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 guides to remove it from the rear seat cushion leg sub-assembly.

8. REMOVE REAR SEAT CUSHION LEG SUB-ASSEMBLY

(a) Remove the 6 bolts and rear seat cushion leg sub-assembly.

9. REMOVE NO. 1 HYBRID BATTERY INTAKE DUCT

(a) Disengage the 2 clamps.

(b) Remove the 2 clips and No. 1 hybrid battery intake duct from the battery cooling blower assembly.

10. REMOVE BATTERY COOLING BLOWER ASSEMBLY

(a) Disconnect the battery cooling blower assembly connector.

(b) Remove the bolt, nut and battery cooling blower assembly from the HV battery.

NOTICE:

  • Be sure not to touch the fan part of the battery cooling blower assembly.
  • Do not lift the battery cooling blower assembly using the wire harness.

11. REMOVE BATTERY COOLING BLOWER BRACKET

(a) Disengage the clamp.

(b) Remove the 3 bolts and battery cooling blower bracket from the battery cooling blower assembly.