INSTALLATION

PROCEDURE

1. INSTALL BATTERY COOLING BLOWER BRACKET

(a) Install the battery cooling blower bracket to the battery cooling blower assembly with the 3 bolts.

Torque:

7.5 N·m {76 kgf·cm, 66 in·lbf}

(b) Engage the clamp.

2. INSTALL BATTERY COOLING BLOWER ASSEMBLY

(a) Install the battery cooling blower assembly to the HV battery with the bolt and nut.

Torque:

7.5 N·m {76 kgf·cm, 66 in·lbf}

(b) Connect the battery cooling blower assembly connector.

3. INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT

(a) Install the No. 1 hybrid battery intake duct to the battery cooling blower assembly with the 2 clips.

(b) Engage the 2 clamps.

4. INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY

(a) Temporarily install the rear seat cushion leg sub-assembly with the 6 bolts.

(b) Fully tighten the 6 bolts in the order shown in the illustration.

Torque:

16 N·m {163 kgf·cm, 12 ft·lbf}

5. INSTALL REAR UNDER COVER

(a) Engage the 2 guides.

(b) Engage the 2 clips to install the rear under cover to the rear seat cushion leg sub-assembly.

6. INSTALL REAR UNDER SIDE COVER LH

(a) Engage the claw, 5 clips and guide.

(b) Install the rear under side cover LH with the 2 clips.

7. INSTALL REAR DOOR SCUFF PLATE LH

Click here

8. INSTALL REAR UNDER SIDE COVER RH

(a) Engage the claw, 5 clips and guide.

(b) Install the rear under side cover RH with the 2 clips.

9. INSTALL REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.

10. INSTALL REAR SEAT CUSHION LOCK HOOK

Click here

11. INSTALL REAR SEAT CUSHION ASSEMBLY

Click here