| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014XMJ |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - ] |
| Title: HYBRID / BATTERY CONTROL: ACCELERATOR PEDAL SENSOR: ON-VEHICLE INSPECTION; 2018 - 2024 MY Camry HV [07/2017 - ] | ||
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / Hybrid Control / Data List / Accelerator Position Sensor No.1 Voltage %, Accelerator Position Sensor No.2 Voltage %.
Powertrain > Hybrid Control > Data List
|
Tester Display |
|---|
|
Accelerator Position Sensor No.1 Voltage % |
|
Accelerator Position Sensor No.2 Voltage % |
(e) Read the Data List.
|
Tester Display |
Accelerator Pedal Condition |
Specified Condition |
|---|---|---|
|
Accelerator Position Sensor No.1 Voltage % |
Not depressed |
10 to 22% |
|
Fully depressed |
52 to 90% |
|
|
Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) |
Value changes progressively |
|
|
Accelerator Position Sensor No.2 Voltage % |
Not depressed |
24 to 40% |
|
Fully depressed |
68 to 99% |
|
|
Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) |
Value changes progressively |
|
|