Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014XKD
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 -           ]
Title: PARKING BRAKE: PARKING BRAKE SYSTEM: PRECAUTION; 2018 - 2024 MY Camry HV [07/2017 -        ]

PRECAUTION

NOTICE:

  • If the auxiliary battery is connected, the parking brake will operate when the electric parking brake switch assembly is pulled to the lock side even if the power switch is off. Do not operate the electric parking brake switch assembly with the auxiliary battery connected unless specified in the repair manual.
  • To prevent the electric parking brake system from operating when the shift lever is moved, make sure that the shift-linked function is disabled.
  • After the power switch is turned off, the parking brake ECU assembly (brake actuator assembly) and parking brake actuator assembly will continue operating for 20 seconds. If a connector is disconnected during this period, a DTC may be stored.
  • If any part is removed and installed, check for DTCs to make sure that the normal system code is output after all parts are installed.

    Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; PARKING BRAKE: ELECTRIC PARKING BRAKE SYSTEM: DTC CHECK / CLEAR 2021 - 2024 MY Camry HV [10/2020 -        ]; PARKING BRAKE: ELECTRIC PARKING BRAKE SYSTEM: DTC CHECK / CLEAR

  • Replacing a part with a part which does not meet the same specifications may affect the performance of the brake system or lead to a hazardous situation. When replacing a part, always use a part with the same part number or equivalent.
  • When servicing the brake system, keep the parts and areas around the parts clean.
  • If the vehicle is equipped with a mobile communication system, make sure to read the related precautions in Introduction.

    Click here 2018 - 2019 MY Camry HV [07/2017 - 09/2019]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION 2020 - 2024 MY Camry HV [09/2019 -        ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION

  • When tilting the vehicle to perform work after parking the vehicle on a level surface, the braking force of the parking brake may not be sufficient. Make sure to pull the electric parking brake switch assembly to the lock side 2 times (2 lock operations).
    • The electric parking brake system determines the amount of force used to operate the parking brake according to the tilt angle detected by the deceleration sensor (airbag sensor assembly).
    • When the parking brake indicator (red) is illuminated after the electric parking brake switch assembly has been pulled to the lock side, the maximum amount of braking force is applied if the electric parking brake switch assembly is pulled to the lock side one more time.