Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014XF7
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 -           ]
Title: HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM: B1477; A/C Inverter Low Voltage Power Resource System Malfunction; 2018 - 2024 MY Camry HV [07/2017 -        ]

DTC

B1477

A/C Inverter Low Voltage Power Resource System Malfunction

DESCRIPTION

The compressor with motor assembly monitors the inverter control power source voltage. The hybrid vehicle control ECU assembly stops the compressor control and stores this DTC if the monitored voltage is outside the specified range.

This DTC will be stored as a history DTC. Compressor control may not resume unless the power switch is turned off.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Memory

B1477

A/C Inverter Low Voltage Power Resource System Malfunction

Open or short to ground in inverter control power voltage circuit

Compressor with motor assembly

Memorized

CAUTION / NOTICE / HINT

CAUTION:

  • Before inspecting the high-voltage system, take safety precautions such as wearing insulated gloves and removing the service plug grip to prevent electrical shocks. After removing the service plug grip, put it in your pocket to prevent other technicians from accidentally reconnecting it while you are working on the high-voltage system.
  • Do not touch the high-voltage connectors or terminals for 10 minutes after the service plug grip is removed.

NOTICE:

  • After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

    Click here 2018 - 2019 MY Camry HV [07/2017 - 09/2019]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION 2020 - 2024 MY Camry HV [09/2019 -        ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION

  • The hybrid control system and air conditioning system output DTCs separately. Perform troubleshooting for the hybrid control system first if DTCs for both systems are output simultaneously.
  • The air conditioning system uses the CAN communication system. Inspect the communication functions by following How to Proceed with Troubleshooting. Troubleshoot the air conditioning system after confirming that the communication systems are functioning properly.

    Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING 2021 - 2024 MY Camry HV [10/2020 -        ]; HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

PROCEDURE

1.

REPLACE COMPRESSOR WITH MOTOR ASSEMBLY

(a) Replace the compressor with motor assembly.

Click here 2018 MY Camry HV [07/2017 - 09/2018]; HEATING / AIR CONDITIONING: COMPRESSOR: REMOVAL 2019 - 2020 MY Camry HV [09/2018 - 10/2020]; HEATING / AIR CONDITIONING: COMPRESSOR: REMOVAL 2021 - 2024 MY Camry HV [10/2020 -        ]; HEATING / AIR CONDITIONING: COMPRESSOR: REMOVAL

NOTICE:

As this DTC is stored when the compressor with motor assembly is malfunctioning, it is necessary to replace the compressor with motor assembly.

NEXT

END