Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM1000000014W6K |
Model Year Start: 2018 |
Model: Camry HV |
Prod Date Range: [07/2017 - 10/2020] |
Title: CRUISE CONTROL: FORWARD RECOGNITION CAMERA SYSTEM: C1A0A; Front Radar Sensor Region Code Mismatch; 2018 - 2020 MY Camry HV [07/2017 - 10/2020] |
DTC
|
C1A0A
|
Front Radar Sensor Region Code Mismatch
|
DESCRIPTION
The forward recognition camera receives necessary information from the millimeter wave radar sensor assembly.
When the forward recognition camera judges that a millimeter wave radar sensor assembly which is not compatible with the vehicle has been installed, DTC C1A0A is stored.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
C1A0A
|
Front Radar Sensor Region Code Mismatch
|
After the power switch is turned on (IG) for 3 seconds or more, the forward recognition camera detects that a millimeter wave radar sensor assembly which is not compatible with the vehicle is installed for 5 seconds or more.
|
-
Millimeter wave radar sensor assembly
-
Forward recognition camera
|
CAUTION / NOTICE / HINT
NOTICE:
-
When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.
-
If the forward recognition camera has been replaced with a new one, be sure to perform forward recognition camera adjustment.
Click here
-
When replacing the millimeter wave radar sensor assembly, always replace it with a new one. If a millimeter wave radar sensor assembly which was installed to another vehicle is used, the information stored in the millimeter wave radar sensor assembly will not match the information from the vehicle. As a result, a DTC may be stored.
-
If the millimeter wave radar sensor assembly has been replaced, be sure to perform millimeter wave radar sensor assembly adjustment.
Click here
PROCEDURE
1.
|
CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM)
|
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs
(b) Perform the following procedure.
HINT:
If the following procedure is not performed, the previously output DTC cannot be detected.
-
Turn the power switch on (IG) and wait 8 seconds or more.
(c) Check for DTCs.
Chassis > Front Recognition Camera > Trouble Codes
Result
|
Proceed to
|
DTC C1A0A is not output
|
A
|
DTC C1A0A is output
|
B
|
B
|
|
|
2.
|
REPLACE MILLIMETER WAVE RADAR SENSOR ASSEMBLY
|
(a) Replace the millimeter wave radar sensor assembly.
Click here
(b) Adjust the millimeter wave radar sensor assembly.
Click here
NEXT
|
|
|
3.
|
CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM)
|
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs
(b) Perform the following procedure.
HINT:
If the following procedure is not performed, the previously output DTC cannot be detected.
-
Turn the power switch on (IG) and wait 8 seconds or more.
(c) Check for DTCs.
Chassis > Front Recognition Camera > Trouble Codes
Result
|
Proceed to
|
DTC C1A0A is not output
|
A
|
DTC C1A0A is output
|
B
|
A |
|
END (MILLIMETER WAVE RADAR SENSOR ASSEMBLY WAS DEFECTIVE)
|
|