| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014W39 |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - 10/2020] |
| Title: EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION; 2018 - 2020 MY Camry HV [07/2017 - 10/2020] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
When the rear bumper is damaged or deformed due to an accident or contact with other objects, etc., or the bumper installation area on the body is repaired, it is necessary to perform ultrasonic sensor detection angle measurement.
Click here
![2018 - 2020 MY Camry HV [07/2017 - 10/2020]; PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM: CALIBRATION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
1. INSTALL REAR BUMPER ASSEMBLY
(a) w/ Intuitive Parking Assist System:
|
Install in this Direction |
(1) Connect the connector.
(b) Engage the 2 guides and 4 claws as shown in the illustration.
(c) Engage the 5 claws as shown in the illustration.
|
|
Install in this Direction |
HINT:
Use the same procedure for the RH side and LH side.
(d) Install the 2 screws.
(e) Install the rear bumper assembly with the 12 clips.
2. INSTALL REAR COMBINATION LIGHT COVER LH
Click here
3. INSTALL REAR COMBINATION LIGHT COVER RH
HINT:
Use the same procedure as for the LH side.
|
|