| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014W2Z |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - 10/2020] |
| Title: EXTERIOR PANELS / TRIM: FRONT BUMPER: DISASSEMBLY; 2018 - 2020 MY Camry HV [07/2017 - 10/2020] | ||
DISASSEMBLY
PROCEDURE
1. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY
Click here
![2018 - 2020 MY Camry HV [07/2017 - 10/2020]; CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE FRONT LICENSE PLATE BRACKET SUB-ASSEMBLY (for Bar Type Radiator Grille)
|
(a) Remove the 2 screws. |
|
(b) Disengage the 2 guides to remove the front licence plate bracket sub-assembly as shown in the illustration.
|
Remove in this Direction |
3. REMOVE FRONT LICENSE PLATE BRACKET SUB-ASSEMBLY (for Mesh Type Radiator Grille)
|
(a) Remove the 2 screws. |
|
(b) Disengage the 2 guides to remove the front licence plate bracket sub-assembly as shown in the illustration.
|
|
Remove in this Direction |
4. REMOVE FRONT BUMPER PAD LH (for Bar Type Radiator Grille)
|
(a) Disengage the 2 claws and guide to remove the front bumper pad LH. |
|
5. REMOVE FRONT BUMPER PAD RH (for Bar Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
6. REMOVE FRONT BUMPER PAD LH (for Mesh Type Radiator Grille)
|
(a) Disengage the claw and guide to remove the front bumper pad LH. |
|
7. REMOVE FRONT BUMPER PAD RH (for Mesh Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
8. REMOVE FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
Click here
9. REMOVE FRONT CENTER ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
Click here
HINT:
Use the same procedure for the RH side and LH side.
10. REMOVE FRONT CORNER ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
Click here
HINT:
Use the same procedure for the RH side and LH side.
11. REMOVE FRONT CENTER ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)
Click here
HINT:
Use the same procedure for the RH side and LH side.
12. REMOVE FRONT CORNER ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)
Click here
HINT:
Use the same procedure for the RH side and LH side.
13. REMOVE NO. 4 ENGINE ROOM WIRE (w/ Intuitive Parking Assist System)
(a) Disengage the 10 clamps to remove the No. 4 engine room wire.
14. REMOVE HOOD TO FRONT END PANEL SEAL
|
(a) Disengage the 6 clips. |
|
(b) Separate the double-sided tape and disengage the guide to remove the hood to front end panel seal.
|
Double-sided Tape |
15. REMOVE RADIATOR GRILLE EMBLEM ASSEMBLY
|
(a) Remove the 2 screws. |
|
|
(b) Disengage the 2 claws and guide to remove the radiator grille emblem assembly. |
|
16. REMOVE RADIATOR GRILLE SIDE MOULDING LH (for Bar Type Radiator Grille)
|
(a) Remove the screw. |
|
(b) Disengage the 3 claws to remove the radiator grille side moulding LH as shown in the illustration.
|
|
Remove in this Direction |
17. REMOVE RADIATOR GRILLE SIDE MOULDING RH (for Bar Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
18. REMOVE RADIATOR GRILLE (for Bar Type Radiator Grille)
|
(a) Remove the 2 clips. |
|
|
(b) Remove the 6 screws and radiator grille. |
|
19. REMOVE RADIATOR GRILLE (for Mesh Type Radiator Grille)
|
(a) Remove the 2 clips. |
|
|
(b) Remove the 10 screws and radiator grille. |
|
20. REMOVE LOWER RADIATOR GRILLE MOULDING (for Mesh Type Radiator Grille)
|
(a) Remove the 2 screws. |
|
(b) Disengage the 16 claws to remove the lower radiator grille moulding.
21. REMOVE LOWER RADIATOR GRILLE MOULDING LH (for Mesh Type Radiator Grille)
|
(a) Disengage the 10 claws to remove the lower radiator grille moulding LH. |
|
22. REMOVE LOWER RADIATOR GRILLE MOULDING RH (for Mesh Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
23. REMOVE FOG LIGHT COVER LH (for Mesh Type Radiator Grille)
|
(a) Disengage the 6 claws to remove the fog light cover LH. |
|
24. REMOVE FOG LIGHT COVER RH (for Mesh Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
25. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Bar Type Radiator Grille)
|
(a) Remove the 6 screws. |
|
(b) Disengage the 23 claws to remove the lower radiator grille sub-assembly.
26. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Mesh Type Radiator Grille)
|
(a) Remove the 2 screws. |
|
(b) Disengage the 18 claws to remove the lower radiator grille sub-assembly.
27. REMOVE RADIATOR GRILLE SIDE MOULDING LH (for Mesh Type Radiator Grille)
|
(a) Remove the 2 clips. |
|
|
(b) Disengage the 2 claws and 2 guides to remove the radiator grille side moulding LH. |
|
28. REMOVE RADIATOR GRILLE SIDE MOULDING RH (for Mesh Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
29. REMOVE PIN HOLD CLIP
(a) Disengage the 4 claws to remove the 2 pin hold clips as shown in the illustration.
|
|
Remove in this Direction |
HINT:
Use the same procedure for the RH side and LH side.
30. REMOVE FRONT FENDER LINER RETAINER
(a) Remove the 2 front fender liner retainers as shown in the illustration.
|
|
Remove in this Direction |
HINT:
Use the same procedure for the RH side and LH side.
31. REMOVE NO. 2 FRONT BUMPER ENERGY ABSORBER
(a) Disengage the 4 guides to remove the No. 2 front bumper energy absorber as shown in the illustration.
|
|
Remove in this Direction |
32. REMOVE FRONT BUMPER ENERGY ABSORBER
(a) Disengage the 2 guides to remove the front bumper energy absorber as shown in the illustration.
|
|
Remove in this Direction |
33. REMOVE FRONT BUMPER REINFORCEMENT
(a) Remove the headlight assembly LH.
Click here
(b) Remove the headlight assembly RH.
HINT:
Use the same procedure as for the LH side.
|
(c) Disengage the 5 clamps. |
|
(d) Remove the 8 bolts and front bumper reinforcement.
34. REMOVE FRONT BUMPER SIDE RETAINER LH
|
(a) Remove the bolt. |
|
(b) Disengage the 2 clips to remove the front bumper side retainer LH as shown in the illustration.
|
|
Remove in this Direction |
35. REMOVE FRONT BUMPER SIDE RETAINER RH
HINT:
Use the same procedure as for the LH side.
|
|