| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014VNZ |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - 09/2018] |
| Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: C147D; Air Bag Circuit; 2018 MY Camry HV [07/2017 - 09/2018] | ||
|
DTC |
C147D |
Air Bag Circuit |
DESCRIPTION
The skid control ECU (brake booster with master cylinder assembly) receives the secondary collision brake control request signal from the airbag sensor assembly.
|
DTC No. |
Detection Item |
INF Code |
DTC Detection Condition |
Trouble Area |
Note |
|---|---|---|---|---|---|
|
C147D |
Air Bag Circuit |
451 |
An abnormal secondary collision brake control request signal is received 2 times or more when communication with the airbag sensor assembly is possible. |
|
Secondary collision brake DTC HINT: The DTC is cleared when the conditions return to normal. |
CAUTION / NOTICE / HINT
NOTICE:
After replacing the skid control ECU (brake booster with master cylinder assembly), perform linear solenoid valve offset learning, ABS holding solenoid valve learning, yaw rate and acceleration sensor zero point calibration and system information memorization after performing "Reset Memory".
Click here
![2018 MY Camry HV [07/2017 - 09/2018]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: INITIALIZATION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
|
1. |
CHECK DTC (AIRBAG SYSTEM) |
(a) Check if airbag system DTCs are output.
Body Electrical > SRS Airbag > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
DTCs are not output. |
A |
|
DTCs are output. |
B |
| A |
|
| B |
|
|
|