| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014VN5 |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - 09/2018] |
| Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: C1419,C1435; Deceleration Sensor Internal Circuit; 2018 MY Camry HV [07/2017 - 09/2018] | ||
|
DTC |
C1419 |
Deceleration Sensor Internal Circuit |
|
DTC |
C1435 |
Yaw Rate Sensor Internal Circuit |
DESCRIPTION
The airbag sensor assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition using 2 circuits (GL1, GL2).
If an internal malfunction signal from the yaw rate and acceleration sensor (airbag sensor assembly) is detected by the skid control ECU (brake booster with master cylinder assembly), DTC C1419 and/or DTC C1435 is stored.
|
DTC No. |
Detection Item |
INF Code |
DTC Detection Condition |
Trouble Area |
Note |
|---|---|---|---|---|---|
|
C1419 |
Deceleration Sensor Internal Circuit |
1137 |
Acceleration sensor internal malfunction signal is detected. |
Acceleration sensor (airbag sensor assembly) |
ABS DTC |
|
C1435 |
Yaw Rate Sensor Internal Circuit |
711 712 |
Yaw rate sensor internal malfunction signal is detected. |
Yaw rate sensor (airbag sensor assembly) |
VSC DTC |
CAUTION / NOTICE / HINT
NOTICE:
After replacing or reinstalling the yaw rate and acceleration sensor (airbag sensor assembly), perform yaw rate and acceleration sensor zero point calibration after clearing previously calibrated data.
Click here
![2018 MY Camry HV [07/2017 - 09/2018]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: CALIBRATION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
|
1. |
REPLACE AIRBAG SENSOR ASSEMBLY |
(a) Replace the yaw rate and acceleration sensor (airbag sensor assembly).
Click here
| NEXT |
|
END |
|
|