Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM1000000014VM9 |
Model Year Start: 2018 |
Model: Camry HV |
Prod Date Range: [07/2017 - 09/2018] |
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: C1451; Motor Drive Permission Malfunction; 2018 MY Camry HV [07/2017 - 09/2018] |
DTC
|
C1451
|
Motor Drive Permission Malfunction
|
DESCRIPTION
If air bleeding has not been performed, the skid control ECU (brake booster with master cylinder assembly) stores DTC C1451 to prevent the entry of air due to pump motor operation.
DTC C1451 is stored when Motor Invalid is selected, the system will not return to normal until the air bleeding procedure is performed.
DTC No.
|
Detection Item
|
INF Code
|
DTC Detection Condition
|
Trouble Area
|
Note
|
C1451
|
Motor Drive Permission Malfunction
|
1152
|
Either of the following is detected:
-
Using the Techstream, "Motor Invalid" of the "ECB Utility" has been performed.
-
The brake booster with master cylinder assembly has been replaced.
|
Air bleeding not performed
|
Electronically controlled brake system DTC
HINT:
-
The DTC is cleared when the conditions return to normal.
-
ECB: Electronically Controlled Brake System
|
DTC Detection Conditions: C1451 INF Code: 1152
|
Vehicle Condition
|
Pattern 1
|
Pattern 2
|
Diagnosis Condition
|
-
|
-
|
-
|
Malfunction Status
|
Using the Techstream, "Motor Invalid" of the "ECB* Utility" has been performed.
|
○
|
-
|
The brake booster with master cylinder assembly has been replaced.
|
-
|
○
|
Detection Time
|
-
|
-
|
Number of Trips
|
1 trip
|
1 trip
|
HINT:
DTC will be output when conditions for either of the patterns in the table above are met.
PROCEDURE
(a) Bleed the air from the brake system.
Click here
HINT:
If air bleeding has been performed, this DTC will be cleared.
NEXT
|
|
|
(a) Check if the same DTC is output.
Chassis > ABS/VSC/TRAC > Trouble Codes
Result
|
Proceed to
|
DTC C1451 is output.
|
A
|
DTC C1451 is not output.
|
B
|
B |
|
END
|
|