Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM1000000014V2O |
Model Year Start: 2018 |
Model: Camry HV |
Prod Date Range: [07/2017 - 09/2018] |
Title: HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: DISASSEMBLY; 2018 MY Camry HV [07/2017 - 09/2018] |
DISASSEMBLY
PROCEDURE
1. REMOVE NO. 2 INSTRUMENT PANEL WIRE
(a) Disconnect the 2 connectors.
|
|
(b) Disengage each clamp to remove the No. 2 instrument panel wire.
2. REMOVE NO. 2 AIR DUCT
(a) Remove the screw.
*a
|
View A
|
|
Front
|
(b) Disengage the 3 claws to remove the No. 2 air duct.
NOTICE:
Be careful not to deform or damage the lower heater case of the air conditioner unit assembly when removing the No. 2 air duct.
3. REMOVE ASPIRATOR
(a) Disengage the guide and 2 claws to remove the aspirator.
|
|
4. REMOVE BLOWER ASSEMBLY
Click here
5. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
(a) Disconnect the connector.
|
Remove in this Direction
|
(b) Remove the screw.
(c) Disengage the guide to remove the air conditioning amplifier assembly as shown in the illustration.
6. REMOVE AIR CONDITIONING HARNESS ASSEMBLY
(a) Disconnect each connector.
|
|
(b) Disengage each clamp to remove the air conditioning harness assembly.
7. REMOVE NO. 2 HEATER COVER
(b) Disengage the claw and each guide to remove the No. 2 heater cover.
8. REMOVE QUICK HEATER ASSEMBLY
(a) Remove the quick heater assembly as shown in the illustration.
|
Remove in this Direction
|
9. REMOVE DRAIN COOLER HOSE
(a) Remove the drain cooler hose.
|
|
10. REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
(a) Remove the 3 screws and No. 1 air conditioning radiator damper servo sub-assembly.
|
|
11. REMOVE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
(a) Remove the 2 screws and No. 2 air conditioning radiator damper servo sub-assembly.
|
|
12. REMOVE NO. 3 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
(a) Remove the 2 screws and No. 3 air conditioning radiator damper servo sub-assembly.
|
|
13. REMOVE HEATER PIPE GROMMET
(a) Remove the heater pipe grommet.
|
|
14. REMOVE HEATER CLAMP
(a) Disengage the 3 claws to remove the heater clamp.
|
|
15. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
|
Remove in this Direction
|
(a) Remove the heater radiator unit sub-assembly as shown in the illustration.
NOTICE:
Prepare a drain pan or cloth in case the coolant leaks.
16. REMOVE GROMMET SUB-ASSEMBLY
(a) Remove the grommet sub-assembly.
|
|
17. REMOVE COOLER EXPANSION VALVE
(a) Using a 4 mm hexagon socket wrench, remove the 2 hexagon bolts and cooler expansion valve.
|
|
(b) Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.
18. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
(a) Remove the 2 screws.
(b) Disengage the 10 claws to remove the upper heater case with No. 1 cooler evaporator sub-assembly from the lower heater case.
(d) Remove the No. 1 cooler evaporator sub-assembly with No. 1 cooler thermistor from the upper heater case.
19. REMOVE NO. 1 COOLER THERMISTOR
Click here
|