- Swing grill actuator assembly
- Radiator shutter sub-assembly
| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000014TYA |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - 10/2020] |
| Title: EXTERIOR PANELS / TRIM: GRILLE SHUTTER: REMOVAL; 2018 - 2020 MY Camry HV [07/2017 - 10/2020] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during grille shutter removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
Front bumper assembly (w/ Panoramic view monitor system) |
Front television camera view adjustment |
Panoramic view monitor system |
|
|
|
Change grille shutter control mode and/or perform initialization |
Grille Shutter system |
|
PROCEDURE
1. REMOVE FRONT BUMPER ASSEMBLY
Click here
![2018 - 2020 MY Camry HV [07/2017 - 10/2020]; EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE RH
|
(a) Disengage the 2 claws to remove the front radiator side air guide plate RH. |
|
3. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE LH
|
(a) Disengage the 2 claws to remove the front radiator side air guide plate LH. |
|
4. REMOVE THERMISTOR ASSEMBLY
Click here
5. REMOVE RADIATOR SHUTTER SUB-ASSEMBLY
|
(a) Disconnect the connector. |
|
(b) Disengage the clamp.
(c) Remove the 3 bolts.
(d) Disengage the 2 guides to remove the radiator shutter sub-assembly as shown in the illustration.
|
Remove in this Direction |
|
|