Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000014TY1
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 - 10/2020]
Title: EXTERIOR PANELS / TRIM: GRILLE SHUTTER SYSTEM: B1333; Shutter Control State Maintenance Mode; 2018 - 2020 MY Camry HV [07/2017 - 10/2020]

DTC

B1333

Shutter Control State Maintenance Mode

DESCRIPTION

This DTC is stored when the grille shutter system is changed to maintenance mode.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B1333

Shutter Control State Maintenance Mode

The grille shutter system is changed to maintenance mode.

Swing grille actuator assembly

CAUTION / NOTICE / HINT

NOTICE:

If the swing grille actuator assembly has been replaced with a new one, perform initialization and change the grille shutter control mode.

Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; EXTERIOR PANELS / TRIM: GRILLE SHUTTER SYSTEM: INITIALIZATION

PROCEDURE

1.

CLEAR DTC

(a) Clear the DTCs.

Body Electrical > Grille Shutter > Clear DTCs

NEXT

2.

CHECK FOR DTC

(a) Check for DTCs.

Body Electrical > Grille Shutter > Trouble Codes

OK:

DTC B1333 is not output.

NG

USE SIMULATION METHOD TO CHECK 2018 MY Camry HV [07/2017 - 09/2018]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING 2019 MY Camry HV [09/2018 - 09/2019]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING 2020 MY Camry HV [09/2019 - 10/2020]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING

OK

3.

CHANGE GRILLE SHUTTER CONTROL MODE

(a) Change the grille shutter control mode to normal mode.

Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; EXTERIOR PANELS / TRIM: GRILLE SHUTTER SYSTEM: INITIALIZATION

NEXT

4.

CHECK FOR DTC

(a) Check for DTCs.

Body Electrical > Grille Shutter > Trouble Codes

OK:

DTC B1333 is not output.

OK

END (GRILLE SHUTTER CONTROL MODE WAS NOT CHANGED)
NG

REPLACE SWING GRILLE ACTUATOR ASSEMBLY