THEFT DETERRENT / KEYLESS ENTRY: ID CODE BOX: REMOVAL; 2023 - 2024 MY Camry [08/2022

Last Modified: 11-20-2023	6.11:8.1.0	Doc ID: RM1000000025AYZ
Model Year Start: 2023	Model: Camry	Prod Date Range: [08/2022 - ]
Title: THEFT DETERRENT / KEYLESS ENTRY: ID CODE BOX: REMOVAL; 2023 - 2024 MY Camry [08/2022 - ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during transponder key ECU removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure	Necessary Procedure	Effect/Inoperative Function when Necessary Procedure not Performed	Link
Disconnect cable from negative battery terminal	Perform steering sensor zero point calibration	Lane Tracing Assist System
	Perform steering sensor zero point calibration	Pre-collision system
	Memorize steering angle neutral point	Parking Assist Monitor System
	Memorize steering angle neutral point	Panoramic View Monitor System
Steering sensor	Steering angle neutral point (Initialize parking assist monitor system) Steering angle setting	Parking Assist Monitor System	for Initialization for Calibration
ID code box(Immobiliser code ECU)	Code registration	Wireless Door Lock Control System Smart Key System (for Entry Function) Smart Key System (for Start Function)

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

Click here

PROCEDURE

1. REMOVE AIR CONDITIONER UNIT ASSEMBLY

Click here

2. REMOVE ID CODE BOX (IMMOBILISER CODE ECU)

(a) Disconnect the connector to remove the transponder key ECU assembly.