Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001TAMA
Model Year Start: 2021 Model: Camry Prod Date Range: [10/2020 -           ]
Title: HEATING / AIR CONDITIONING: COMPRESSOR (for A25A-FKS): REMOVAL; 2021 - 2024 MY Camry [10/2020 -        ]

REMOVAL

PROCEDURE

1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Click here 2018 - 2024 MY Camry [03/2017 -        ]; HEATING / AIR CONDITIONING: REFRIGERANT (for HFO-1234yf(R1234yf)): REPLACEMENT+

2. REMOVE V-RIBBED BELT

Click here 2018 - 2024 MY Camry [03/2017 -        ]; MAINTENANCE: A25A-FKS DRIVE BELT: REMOVAL

3. REMOVE COOL AIR INTAKE DUCT SEAL

Click here 2021 - 2024 MY Camry [10/2020 -        ]; EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL+

4. REMOVE INLET AIR CLEANER ASSEMBLY

Click here 2021 - 2022 MY Camry [10/2020 - 08/2022]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+ 2023 - 2024 MY Camry [08/2022 -        ]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

5. DISCONNECT NO. 5 WATER BY-PASS HOSE

Click here 2021 - 2024 MY Camry [10/2020 -        ]; A25A-FKS (COOLING): RADIATOR: REMOVAL+

6. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE SUB-ASSEMBLY

(a) Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose sub-assembly from the compressor assembly with pulley.

(b) Remove the O-ring from the No. 1 cooler refrigerant discharge hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

7. DISCONNECT SUCTION HOSE SUB-ASSEMBLY

(a) Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.

(b) Remove the O-ring from the suction hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

8. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY

(a) Disconnect the connector.

(b) Disconnect the connector.

(c) for Type A:

(1) Remove the 2 bolts and 2 nuts.

Bolt

Nut

(2) Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor assembly with pulley.

(d) for Type B:

(1) Remove the 4 bolts and compressor assembly with pulley.