| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001TAMA |
| Model Year Start: 2021 | Model: Camry | Prod Date Range: [10/2020 - ] |
| Title: HEATING / AIR CONDITIONING: COMPRESSOR (for A25A-FKS): REMOVAL; 2021 - 2024 MY Camry [10/2020 - ] | ||
REMOVAL
PROCEDURE
1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
Click here
![2018 - 2024 MY Camry [03/2017 - ]; HEATING / AIR CONDITIONING: REFRIGERANT (for HFO-1234yf(R1234yf)): REPLACEMENT+](/t3Portal/stylegraphics/info.gif)
2. REMOVE V-RIBBED BELT
Click here
3. REMOVE COOL AIR INTAKE DUCT SEAL
Click here
4. REMOVE INLET AIR CLEANER ASSEMBLY
Click here
5. DISCONNECT NO. 5 WATER BY-PASS HOSE
Click here
6. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE SUB-ASSEMBLY
|
(a) Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose sub-assembly from the compressor assembly with pulley. |
|
(b) Remove the O-ring from the No. 1 cooler refrigerant discharge hose sub-assembly.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
7. DISCONNECT SUCTION HOSE SUB-ASSEMBLY
|
(a) Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley. |
|
(b) Remove the O-ring from the suction hose sub-assembly.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
8. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY
|
(a) Disconnect the connector. |
|
|
(b) Disconnect the connector. |
|
(c) for Type A:
(1) Remove the 2 bolts and 2 nuts.
|
Bolt |
|
Nut |
|
(2) Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor assembly with pulley. |
|
(d) for Type B:
|
(1) Remove the 4 bolts and compressor assembly with pulley. |
|
|
|