- Occupant classification system
- Passenger airbag ON/OFF indicator
- Airbag system (Front passenger side)
- Seat belt warning system (Front passenger)
| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001TA7N |
| Model Year Start: 2021 | Model: Camry | Prod Date Range: [10/2020 - ] |
| Title: SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: REMOVAL; 2021 - 2024 MY Camry [10/2020 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front seat inner belt assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
|
Replacement Part or Procedure |
Necessary Procedures |
Effects / Inoperative when not performed |
Link |
|---|---|---|---|
|
Disconnect cable from negative battery terminal |
Perform steering sensor zero point calibration |
Lane Tracing Assist System |
|
|
Pre-collision System |
|||
|
Memorize steering angle neutral point |
Parking Assist Monitor System |
|
|
|
Panoramic View Monitor System |
|
||
|
Front passenger seat |
Zero point calibration (Occupant classification system) |
|
|
PROCEDURE
1. REMOVE FRONT SEAT ASSEMBLY LH (for Driver Side)
for Manual Seat:
Click here
![2021 - 2024 MY Camry [10/2020 - ]; SEAT: FRONT SEAT ASSEMBLY (for TMMK Made Manual Seat): REMOVAL](/t3Portal/stylegraphics/info.gif)
for Power Seat:
Click here
2. REMOVE FRONT SEAT ASSEMBLY RH (for Front Passenger Side)
for Manual Seat:
Click here
for Power Seat:
Click here
3. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)
(a) Disconnect each connector.
(b) Disengage each clamp.
|
(c) Remove the nut and front seat inner belt assembly LH. |
|
(d) Remove the front seat belt anchor plate as shown in the illustration.
|
Remove in this Direction |
4. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)
(a) Disconnect each connector.
(b) Disengage each clamp.
|
(c) Remove the nut and front seat inner belt assembly RH. |
|
(d) Remove the front seat belt anchor plate as shown in the illustration.
|
|
Remove in this Direction |
|
|