Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001T517
Model Year Start: 2021 Model: Camry Prod Date Range: [10/2020 -           ]
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: SEAT POSITION SENSOR (for TMMK Made): REMOVAL; 2021 - 2024 MY Camry [10/2020 -        ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during seat position airbag sensor removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Disconnect cable from negative battery terminal

Perform steering sensor zero point calibration

Lane tracing assist system

2021 - 2024 MY Camry [10/2020 -        ]; PRE-COLLISION: PRE-COLLISION SYSTEM: INITIALIZATION

Pre-collision system

Memorize steering angle neutral point

Parking assist monitor system

2018 - 2024 MY Camry [03/2017 -        ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: INITIALIZATION

Panoramic view monitor system

2021 - 2024 MY Camry [10/2020 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: INITIALIZATION

PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY LH

for Manual Seat: Click here 2021 - 2024 MY Camry [10/2020 -        ]; SEAT: FRONT SEAT ASSEMBLY (for TMMK Made Manual Seat): REMOVAL

for Power Seat: Click here 2021 - 2024 MY Camry [10/2020 -        ]; SEAT: FRONT SEAT ASSEMBLY (for TMMK Made Power Seat): REMOVAL

2. REMOVE SEAT POSITION AIRBAG SENSOR

(a) Disengage the clamp and disconnect the connector.

(b) Using a T30 "TORX" socket wrench, remove the "TORX" bolt and seat position airbag sensor with the seat slide position sensor protector.

(c) Disengage the pin to remove the seat position airbag sensor from the seat slide position sensor protector as shown in the illustration.

Remove in this Direction