Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001T3W3
Model Year Start: 2021 Model: Camry Prod Date Range: [10/2020 -           ]
Title: PARK ASSIST / MONITORING: TELEVISION CAMERA (for Rear): REMOVAL; 2021 - 2024 MY Camry [10/2020 -        ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear television camera assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

*1: Applies only for when removing and installing or replacing the rear television camera assembly.

Rear television camera assembly (w/ Parking assist monitor system)

  • Parking assist monitor system initialization
  • Rear television camera assembly optical axis (Back camera position setting)

Parking Assist Monitor System

2021 - 2024 MY Camry [10/2020 -        ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: CALIBRATION

Rear television camera assembly (w/ Panoramic view monitor system)

  • Rear television camera view adjustment
  • Rear television camera assembly optical axis (Back camera detection function)

Panoramic View Monitor System

2021 - 2024 MY Camry [10/2020 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: CALIBRATION

Replacement or removal and installation of 2 or more parts:

  • Front television camera assembly, front bumper assembly or radiator grille
  • Rear television camera assembly
  • Side television camera assembly LH or outer rear view mirror assembly LH
  • Side television camera assembly RH or outer rear view mirror assembly RH
  • Television camera view adjustment
  • Rear television camera assembly optical axis (Back camera detection function)*1

Panoramic View Monitor System

2021 - 2024 MY Camry [10/2020 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: CALIBRATION

PROCEDURE

1. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

Click here 2018 - 2024 MY Camry [03/2017 -        ]; EXTERIOR PANELS / TRIM: LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH: REMOVAL

2. REMOVE REAR TELEVISION CAMERA ASSEMBLY WITH WIRE

(a) Disconnect the connector.

(b) Disengage the clamp.

(c) Disengage the 2 claws to remove the rear television camera assembly with wire as shown in the illustration.

Remove in this Direction

3. REMOVE TELEVISION CAMERA WIRE

(a) Disconnect the connector to remove the television camera wire.

4. REMOVE REAR TELEVISION CAMERA ASSEMBLY