Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001SH7L
Model Year Start: 2021 Model: Camry Prod Date Range: [10/2020 -           ]
Title: CRUISE CONTROL: FRONT RADAR SENSOR SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2021 - 2024 MY Camry [10/2020 -        ]

HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

HINT:

  • Before performing troubleshooting for the front radar sensor system, perform troubleshooting for the pre-collision system.

    Click here 2021 - 2024 MY Camry [10/2020 -        ]; PRE-COLLISION: PRE-COLLISION SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

  • *: Use the Techstream.

PROCEDURE

1.

VEHICLE BROUGHT TO WORKSHOP

NEXT

2.

CUSTOMER PROBLEM ANALYSIS

HINT:

  • In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
  • Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
  • The following 5 items are important points for problem analysis:

    What

    Vehicle model, system name

    When

    Date, time, occurrence frequency

    Where

    Road conditions

    Under what conditions?

    Driving conditions, weather conditions

    How did it happen?

    Problem symptoms

NEXT

3.

PRE-CHECK

(a) Measure the battery voltage.

Standard voltage:

11 to 14 V

HINT:

If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

(b) Check the fuses and relays.

(c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.

NEXT

4.

CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

(a) Using the Techstream, check for CAN communication system DTCs.

Click here 2021 MY Camry [10/2020 - 08/2021]; NETWORKING: CAN COMMUNICATION SYSTEM: DIAGNOSIS SYSTEM 2022 - 2024 MY Camry [08/2021 -        ]; NETWORKING: CAN COMMUNICATION SYSTEM: DIAGNOSIS SYSTEM

Result

Proceed to

CAN DTCs are not output

A

CAN DTCs are output

B

B

GO TO CAN COMMUNICATION SYSTEM

A

5.

CHECK FOR DTCs*

(a) Using the Techstream, check for DTCs.

Body Electrical > Front Radar Sensor > Trouble Codes

Result

Proceed to

DTCs are not output

A

DTC C1A1100 is output

B

DTCs other than C1A1100 are output

C

A

GO TO STEP 7

B

GO TO DIAGNOSTIC TROUBLE CODE CHART (C1A1100)

C

6.

RECONFIRM DTC OUTPUT*

(a) Using the Techstream, clear the DTCs.

Body Electrical > Front Radar Sensor > Clear DTCs

(b) Reproduce the vehicle conditions that were present when the DTCs that were noted were stored.

HINT:

Refer to each corresponding DTC for details on the detection conditions.

Click here 2021 - 2024 MY Camry [10/2020 -        ]; CRUISE CONTROL: FRONT RADAR SENSOR SYSTEM: DIAGNOSTIC TROUBLE CODE CHART

(c) Using the Techstream, check for DTCs.

Body Electrical > Front Radar Sensor > Trouble Codes

Result

Proceed to

DTCs are not output

A

DTCs are output

B

B

GO TO DIAGNOSTIC TROUBLE CODE CHART

A

7.

CHECK VEHICLE CONTROL HISTORY*

(a) Using the Techstream, check for Vehicle Control History (RoB).

Body Electrical > Front Radar Sensor > Utility

Tester Display

Vehicle Control History (RoB)

(b) Make a note of the output Vehicle Control History (RoB).

Result

Proceed to

Vehicle Control History (RoB) codes are not output

A

Vehicle Control History (RoB) code X2026 or X2028 is output

B

Vehicle Control History (RoB) codes other than X2026 and X2028 are output

C

A

USE SIMULATION METHOD TO CHECK 2021 MY Camry [10/2020 - 08/2021]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING 2022 - 2024 MY Camry [08/2021 -        ]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING

B

GO TO VEHICLE CONTROL HISTORY (X2026 or X2028)

C

8.

RECONFIRM VEHICLE CONTROL HISTORY*

(a) Using the Techstream, clear the Vehicle Control History (RoB).

Body Electrical > Front Radar Sensor > Utility

Tester Display

Vehicle Control History (RoB)

(b) Using the Techstream, check for Vehicle Control History (RoB).

Body Electrical > Front Radar Sensor > Utility

Tester Display

Vehicle Control History (RoB)

Result

Proceed to

Vehicle Control History (RoB) codes are not output

A

Vehicle Control History (RoB) codes are output

B

A

USE SIMULATION METHOD TO CHECK 2021 MY Camry [10/2020 - 08/2021]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING 2022 - 2024 MY Camry [08/2021 -        ]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING

B

GO TO VEHICLE CONTROL HISTORY