Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001SH69
Model Year Start: 2021 Model: Camry Prod Date Range: [10/2020 -           ]
Title: CRUISE CONTROL: FRONT CAMERA SYSTEM: VEHICLE CONTROL HISTORY; 2021 - 2024 MY Camry [10/2020 -        ]

VEHICLE CONTROL HISTORY

NOTICE:

Make sure to record any output Vehicle Control History codes before clearing them and checking the Vehicle Control History again.

CHECK VEHICLE CONTROL HISTORY (FRONT CAMERA SYSTEM)

(a) Read the Vehicle Control History (RoB) according to the display on the Techstream.

Chassis > Front Recognition Camera > Utility

Tester Display

Vehicle Control History (RoB)

Vehicle Control History (RoB)

Multi-information Display

Code

Tester Display

Measurement Item

Diagnostic Note

Front Camera Unavailable See Owner's Manual

X2000

Yaw Rate Sensor Malfunction

History of yaw rate sensor malfunction signals output by the skid control ECU (brake actuator assembly)

Refer to How to Proceed with Troubleshooting in Vehicle Stability Control System.

w/ Electric Parking Brake System: 2021 - 2024 MY Camry [10/2020 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/ Electric Parking Brake System): HOW TO PROCEED WITH TROUBLESHOOTING

w/o Electric Parking Brake System: 2021 - 2024 MY Camry [10/2020 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/o Electric Parking Brake System): HOW TO PROCEED WITH TROUBLESHOOTING

Front Camera Unavailable See Owner's Manual

X2004

Speed Sensor Malfunction

History of vehicle speed sensor malfunction signals output by the skid control ECU (brake actuator assembly)

Refer to How to Proceed with Troubleshooting in Vehicle Stability Control System.

w/ Electric Parking Brake System: 2021 - 2024 MY Camry [10/2020 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/ Electric Parking Brake System): HOW TO PROCEED WITH TROUBLESHOOTING

w/o Electric Parking Brake System: 2021 - 2024 MY Camry [10/2020 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/o Electric Parking Brake System): HOW TO PROCEED WITH TROUBLESHOOTING

Pre-Collision System Malfunction Visit Your Dealer

X2014

Front Recognition Camera Optical Axis Not Adjusted

History of beam axis non-adjustment status by the forward recognition camera

HINT:

Forward recognition camera axis alignment can be performed by using either One Time Recognition, Sequential Recognition or Driving Adjustment.

One Time Recognition: 2021 - 2024 MY Camry [10/2020 -        ]; CRUISE CONTROL: FRONT CAMERA: TARGET ADJUSTMENT(ONE TIME RECOGNITION)

Sequential Recognition: 2021 - 2024 MY Camry [10/2020 -        ]; CRUISE CONTROL: FRONT CAMERA: TARGET ADJUSTMENT(SEQUENTIAL RECOGNITION)

Driving Adjustment: 2021 - 2024 MY Camry [10/2020 -        ]; CRUISE CONTROL: FRONT CAMERA: DRIVING ADJUSTMENT

Front Camera Low Visibility Unavailable See Owner's Manual

X2015

Front Recognition Camera Dirt

History of forward recognition camera being unable to recognize the front and being temporarily unavailable

  • Check for the following
    • Front wiper blade other than genuine part may be attached
    • Front wiper rubber may be deteriorated
    • There may be stickers, accessories, baggage, etc. in visual field range of forward recognition camera
    • There may be snow, ice, fog, dirt, frost, dust or oil film sticking on windshield glass in front of camera
    • There may be damage or cracks on windshield glass in front of camera
    • Windshield glass other than genuine part may be installed
    • Confirm the vehicle was not driven in poor weather (the warning display will disappear when the conditions [darkness, backlight, snow, fog, etc.] around the forward recognition camera improve and the forward recognition camera can be used again)
    • The inside of the windshield glass is dirty

Cause:

  • When foreign matter or dirt is attached to area around forward recognition camera

Measures:

  • If the inside of the windshield glass is dirty, clean it using glass cleaner.

    2021 MY Camry [10/2020 - 08/2021]; LIGHTING (EXT): LIGHTING SYSTEM: PRECAUTION 2022 - 2024 MY Camry [08/2021 -        ]; LIGHTING (EXT): LIGHTING SYSTEM: PRECAUTION

Front Camera Out of Temperature Range Unavailable Wait until Normal Temperature

X2016

Front Recognition Camera Outside Guaranteed Operating Temperature

History of forward recognition camera being temporarily unavailable due to high temperature or low temperature

Using the Techstream, check the following items for the front recognition camera in the Data List.

2021 - 2024 MY Camry [10/2020 -        ]; CRUISE CONTROL: FRONT CAMERA SYSTEM: DATA LIST / ACTIVE TEST

  • Front Recognition Camera Low Temperature
  • Front Recognition Camera High Temperature 1

Cause:

  • The forward recognition camera is in one of the following conditions
    • When the ambient temperature is approximately -30°C (-22°F) or less, such as when the vehicle is left alone in an extremely cold environment
    • When the ambient temperature is approximately 80°C (176°F) or higher, such as when the vehicle is left alone in an extremely hot environment

Front Camera Unavailable See Owner's Manual

X2017

Front Recognition Camera Outside Guaranteed Operating Voltage

History of forward recognition camera being temporarily unavailable due to low voltage or high voltage

  • Check the power supply voltage (IGB) of the forward recognition camera. For terminals to check and standard values, click here.

    2021 - 2024 MY Camry [10/2020 -        ]; CRUISE CONTROL: FRONT CAMERA SYSTEM: TERMINALS OF ECU

  • If the power supply voltage was within the standard value, the forward recognition camera may be malfunctioning.

Cause:

  • The forward recognition camera is in one of the following conditions
    • When the input voltage is approximately 9 V or less, immediately after starting the engine
    • When the input voltage is approximately 16 V or higher, immediately after starting the engine

Front Camera Low Visibility Unavailable See Owner's Manual

X201C

Front Recognition Camera Haze

History of forward recognition camera being unable to recognize the front and being temporarily unavailable

  1. Check for the following
    • Front wiper blade other than genuine part may be attached
    • Front wiper rubber may be deteriorated
    • There may be stickers, accessories, baggage, etc. in visual field range of forward recognition camera
    • There may be snow, ice, fog, dirt, frost, dust or oil film sticking on windshield glass in front of camera
    • There may be damage or cracks on windshield glass in front of camera
    • Windshield glass other than genuine part may be installed
    • Confirm the vehicle was not driven in poor weather (the warning display will disappear when the conditions [darkness, backlight, snow, fog, etc.] around the forward recognition camera improve and the forward recognition camera can be used again)
    • The inside of the windshield glass is dirty

Cause:

  • When foreign matter or dirt is attached to area around forward recognition camera

Measures:

  • If the inside of the windshield glass is dirty, clean it using glass cleaner.

    2021 MY Camry [10/2020 - 08/2021]; LIGHTING (EXT): LIGHTING SYSTEM: PRECAUTION 2022 - 2024 MY Camry [08/2021 -        ]; LIGHTING (EXT): LIGHTING SYSTEM: PRECAUTION

Front Camera Unavailable See Owner's Manual

X204A

Acceleration Sensor Malfunction

History of G sensor malfunction signals output by the skid control ECU (brake actuator assembly)

Refer to How to Proceed with Troubleshooting in Vehicle Stability Control System.

w/ Electric Parking Brake System: 2021 - 2024 MY Camry [10/2020 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/ Electric Parking Brake System): HOW TO PROCEED WITH TROUBLESHOOTING

w/o Electric Parking Brake System: 2021 - 2024 MY Camry [10/2020 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/o Electric Parking Brake System): HOW TO PROCEED WITH TROUBLESHOOTING

Front Camera Unavailable See Owner's Manual

X204C

Zero Point Calibration of Yaw Rate Sensor Undone

The forward recognition camera received a yaw rate sensor zero point calibration not performed signal from the skid control ECU (brake actuator assembly)

Refer to How to Proceed with Troubleshooting in Vehicle Stability Control System.

w/ Electric Parking Brake System: 2021 - 2024 MY Camry [10/2020 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/ Electric Parking Brake System): HOW TO PROCEED WITH TROUBLESHOOTING

w/o Electric Parking Brake System: 2021 - 2024 MY Camry [10/2020 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/o Electric Parking Brake System): HOW TO PROCEED WITH TROUBLESHOOTING

CLEAR VEHICLE CONTROL HISTORY (FRONT CAMERA SYSTEM)

NOTICE:

By performing this procedure, all stored Vehicle Control History items will be cleared.

(a) According to the display on the Techstream, clear the Vehicle Control History (RoB).

Chassis > Front Recognition Camera > Utility

Tester Display

Vehicle Control History (RoB)