Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM100000001SH5N |
Model Year Start: 2021 |
Model: Camry |
Prod Date Range: [10/2020 -
] |
Title: CRUISE CONTROL: DYNAMIC RADAR CRUISE CONTROL SYSTEM: U030051,U030057; Internal Control Module Software Incompatibility Not Programmed; 2021 - 2024 MY Camry [10/2020 - ] |
DTC
|
U030051
|
Internal Control Module Software Incompatibility Not Programmed
|
DTC
|
U030057
|
Internal Control Module Software Incompatibility Invalid/Incompatible Software Component
|
DESCRIPTION
-
If the forward recognition camera cannot verify the vehicle information sent from the ECM, the forward recognition camera stores DTC U030051.
-
If the vehicle information stored in the forward recognition camera does not match the vehicle information sent from the ECM, the forward recognition camera stores DTC U030057.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
DTC Output from
|
U030051
|
Internal Control Module Software Incompatibility Not Programmed
|
When the ignition switch is ON for 3 seconds, the vehicle information sent from the ECM cannot be verified by the forward recognition camera for approximately 3 seconds or more.
|
Pre-collision system
|
Radar Cruise2
|
U030057
|
Internal Control Module Software Incompatibility Invalid/Incompatible Software Component
|
When the ignition switch is ON for 3 seconds, the vehicle information sent from the ECM does not match that stored in the forward recognition camera for approximately 1 second or more.
|
Pre-collision system
|
Radar Cruise2
|
PROCEDURE
1.
|
CHECK PRE-COLLISION SYSTEM
|
(a) Check the pre-collision system.
Click here
HINT:
If DTC U030051 or U030057 is output by the dynamic radar cruise control system, perform troubleshooting for the pre-collision system.
NEXT |
|
END
|
|