Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001SAO1
Model Year Start: 2021 Model: Camry Prod Date Range: [10/2020 -           ]
Title: CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: REMOVAL; 2021 - 2024 MY Camry [10/2020 -        ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are replaced during millimeter wave radar sensor assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Millimeter wave radar sensor assembly

Adjust millimeter wave radar sensor assembly

  • Dynamic Radar Cruise Control System
  • Lane Tracing Assist System
  • Road Sign Assist System
  • Front Radar Sensor System
  • Pre-collision System
  • Lighting System (EXT)

Target Adjustment (Triangle Target): 2021 - 2024 MY Camry [10/2020 -        ]; CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: TARGET ADJUSTMENT(TRIANGLE TARGET)

or

Target Adjustment (Flat Surface Target): 2021 - 2024 MY Camry [10/2020 -        ]; CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: TARGET ADJUSTMENT(FLAT SURFACE TARGET)

or

Driving Adjustment: 2021 - 2024 MY Camry [10/2020 -        ]; CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: DRIVING ADJUSTMENT

PROCEDURE

1. REMOVE COOL AIR INTAKE DUCT SEAL

Click here 2021 - 2024 MY Camry [10/2020 -        ]; EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL+

2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY

(a) Disconnect the connector.

(b) Remove the 2 bolts and screw.

Bolt

Screw

(c) Disengage the 2 guides and remove the millimeter wave radar sensor assembly.

NOTICE:

Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.