Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001SANY
Model Year Start: 2021 Model: Camry Prod Date Range: [10/2020 -           ]
Title: CRUISE CONTROL: CAMERA HEATER: REMOVAL; 2021 - 2024 MY Camry [10/2020 -        ]

REMOVAL

PROCEDURE

1. REMOVE FORWARD RECOGNITION CAMERA

Click here 2021 - 2024 MY Camry [10/2020 -        ]; CRUISE CONTROL: FRONT CAMERA: REMOVAL

2. REMOVE FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

NOTICE:

  • Do not touch the inner surface of the forward recognition with heater hood sub-assembly.
  • Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.

Inner Surface of Forward Recognition with Heater Hood Sub-assembly

(a) Disconnect the connector.

NOTICE:

Do not pull the harness forcibly when disconnecting the connector.

(b) Disengage the connector clamp.

*a

Connector Clamp

*b

Wire Harness Clamp

(c) Disengage the 2 wire harness clamps in the order shown in the illustration.

NOTICE:

Do not forcibly pull the wire harness as it may become damaged.

(d) Pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (1) shown in the illustration to disengage the 2 claws.

Remove in this Direction (1)

Remove in this Direction (2)

(e) Pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 guides and remove the forward recognition with heater hood sub-assembly.