| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001SAJH |
| Model Year Start: 2021 | Model: Camry | Prod Date Range: [10/2020 - ] |
| Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/ Electric Parking Brake System): C05202A; Multi-axis Acceleration Sensor Module "A" Signal Stuck In Range; 2021 - 2024 MY Camry [10/2020 - ] | ||
|
DTC |
C05202A |
Multi-axis Acceleration Sensor Module "A" Signal Stuck In Range |
DESCRIPTION
The airbag sensor assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition.
The skid control ECU (brake actuator assembly) memorizes the range of the acceleration sensor (airbag sensor assembly) and the range of vehicle speed calculated using each speed sensor.
If the range of the acceleration sensor (airbag sensor assembly) and the range of vehicle speed calculated using each speed sensor are judged to be abnormal when compared to their past memorized range, this DTC is stored.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C05202A |
Multi-axis Acceleration Sensor Module "A" Signal Stuck In Range |
The memorized range (longitudinal) of the acceleration sensor (airbag sensor assembly) is judged to be abnormal when compared to its past memorized range. |
Acceleration sensor (airbag sensor assembly) |
CAUTION / NOTICE / HINT
NOTICE:
After replacing or reinstalling the yaw rate and acceleration sensor (airbag sensor assembly), perform acceleration sensor zero point calibration and system information memorization after performing "Reset Memory".
Click here
![2021 MY Camry [10/2020 - 08/2021]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/ Electric Parking Brake System): CALIBRATION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
|
1. |
REPLACE AIRBAG SENSOR ASSEMBLY |
(a) Replace the yaw rate and acceleration sensor (airbag sensor assembly).
Click here
| NEXT |
|
END |
|
|