Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM100000001S7UP |
Model Year Start: 2021 |
Model: Camry |
Prod Date Range: [10/2020 -
] |
Title: PARKING BRAKE: ELECTRIC PARKING BRAKE SYSTEM: DTC CHECK / CLEAR; 2021 - 2024 MY Camry [10/2020 - ] |
DTC CHECK / CLEAR
CHECK DTC AND FREEZE FRAME DATA (USING TECHSTREAM)
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Enter the following menus: Chassis / Brake/EPB / Trouble Codes.
Chassis > Brake > Trouble Codes
(f) Check for DTCs.
Click here
NOTICE:
The electric parking brake system outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the electric parking brake system are output, refer to Diagnostic Trouble Code Chart for the relevant system.
System
|
Proceed to
|
Vehicle Stability Control System (w/ Electric Parking Brake System)
|
|
(g) Check the freeze frame data.
-
If DTCs are output, check the freeze frame data and read the vehicle status when the DTC was stored.
HINT:
for Freeze Frame Data: Click here
CLEAR DTC AND FREEZE FRAME DATA (USING TECHSTREAM)
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Enter the following menus: Chassis / Brake/EPB / Trouble Codes.
(f) Clear the DTCs.
Chassis > Brake > Clear DTCs
HINT:
When DTCs are cleared, the freeze frame data will also be cleared.
|