Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001RXIS
Model Year Start: 2021 Model: Camry Prod Date Range: [10/2020 -           ]
Title: GF1A (TRANSFER / 4WD / AWD): TRANSFER ASSEMBLY: INSTALLATION; 2021 - 2024 MY Camry [10/2020 -        ]

INSTALLATION

PROCEDURE

1. INSTALL TRANSFER ASSEMBLY

(a) Using SST and a 17 mm union nut wrench, install the transfer assembly to the automatic transaxle assembly with the 8 nuts.

SST: 09961-00950

Torque:

Specified tightening torque :

68.6 N·m {700 kgf·cm, 51 ft·lbf}

HINT:

  • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

    Click here 2020 - 2024 MY Camry [03/2020 -        ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION

  • When using a 17 mm union nut wrench (fulcrum length of 30 mm (1.18 in.)) + SST (fulcrum length of 150 mm (5.91 in.)) + torque wrench (fulcrum length of 255 mm (10.0 in.)): 40.2 N*m (410 kgf*cm, 30 ft.*lbf)

*a

17 mm Union Nut Wrench

*b

Torque Wrench Fulcrum Length

2. INSTALL REAR ENGINE MOUNTING BRACKET SUB-ASSEMBLY

Click here 2021 - 2024 MY Camry [10/2020 -        ]; UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE): AUTOMATIC TRANSAXLE ASSEMBLY: INSTALLATION+

3. INSTALL NO. 1 PROPELLER SHAFT HEAT INSULATOR BRACKET SUB-ASSEMBLY

(a) Install the No. 1 propeller shaft heat insulator bracket sub-assembly to the transfer assembly with the 2 bolts.

Torque:

25 N·m {255 kgf·cm, 18 ft·lbf}

4. INSTALL PROPELLER SHAFT HEAT INSULATOR

Click here 2021 - 2024 MY Camry [10/2020 -        ]; UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE): AUTOMATIC TRANSAXLE ASSEMBLY: INSTALLATION+

5. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY

Click here 2021 - 2024 MY Camry [10/2020 -        ]; UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE): AUTOMATIC TRANSAXLE ASSEMBLY: INSTALLATION