| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001RMUN |
| Model Year Start: 2021 | Model: Camry | Prod Date Range: [10/2020 - ] |
| Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ECU: REMOVAL; 2021 - 2024 MY Camry [10/2020 - ] | ||
REMOVAL
PROCEDURE
1. PRECAUTION
NOTICE:
-
When replacing the radio and display receiver assembly or navigation ECU, always replace it with a new one. If a radio and display receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:
- A communication malfunction DTC may be stored.
- The radio and display receiver assembly or navigation ECU may not operate normally.
- After replacing the navigation ECU, if "New software is not compatible with the system. Contact your dealer." is displayed on the multi-display, update the software of the radio and display receiver assembly.
NOTICE:
Click here
![2021 - 2024 MY Camry [10/2020 - ]; NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: PRECAUTION](/t3Portal/stylegraphics/info.gif)
2. REMOVE AIR CONDITIONING CONTROL ASSEMBLY
Click here
3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 7 Inch Display)
Click here
4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 9 Inch Display)
Click here
5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
Click here
6. REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH
Click here
7. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Click here
8. REMOVE SHIFT LOCK RELEASE BUTTON COVER
for UB80E:
Click here
for UA80E:
Click here
for UB80F:
Click here
9. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
for UB80E:
Click here
for UA80E:
Click here
for UB80F:
Click here
10. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
Click here
11. REMOVE NAVIGATION ECU WITH BRACKET
|
(a) Disconnect each connector. |
|
|
(b) Remove the 3 bolts. |
|
|
(c) Disengage the 3 guides. |
|
|
(d) Disengage the clamp. |
|
(e) Disconnect each connector and remove the navigation ECU with bracket.
12. REMOVE ANTENNA CORD SUB-ASSEMBLY
(a) w/o Manual (SOS) Switch:
|
(1) Disconnect the connector. |
|
(2) Disengage the clamp to remove the antenna cord sub-assembly.
(b) w/ Manual (SOS) Switch:
|
(1) Disconnect the 4 connectors. |
|
(2) Disengage the clamp to remove the antenna cord sub-assembly.
13. REMOVE NO. 2 TELEPHONE BRACKET
(a) w/o Manual (SOS) Switch:
|
(1) Remove the 2 screws and No. 2 telephone bracket. |
|
(b) w/ Manual (SOS) Switch:
|
(1) Remove the 3 screws and No. 2 telephone bracket. |
|
14. REMOVE NO. 1 TELEPHONE BRACKET
(a) w/o Manual (SOS) Switch:
|
(1) Remove the 2 screws and No. 1 telephone bracket. |
|
(b) w/ Manual (SOS) Switch:
|
(1) Remove the 3 screws and No. 1 telephone bracket. |
|
15. REMOVE DCM (TELEMATICS TRANSCEIVER) (w/ Manual (SOS) Switch)
16. REMOVE NAVIGATION ECU
|
|