Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001RLRU
Model Year Start: 2021 Model: Camry Prod Date Range: [10/2020 -           ]
Title: AUDIO / VIDEO: RADIO RECEIVER: REMOVAL; 2021 - 2024 MY Camry [10/2020 -        ]

REMOVAL

PROCEDURE

1. PRECAUTION (w/o Navigation System)

NOTICE:

  • When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occurs:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly may not operate normally.

NOTICE:

Click here 2021 - 2024 MY Camry [10/2020 -        ]; AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: PRECAUTION

2. PRECAUTION (w/ Navigation System)

NOTICE:

  • When replacing the radio and display receiver assembly or navigation ECU, always replace it with a new one. If a radio and display receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly or navigation ECU may not operate normally.
  • After replacing the radio and display receiver assembly, if "New software is not compatible with the system. Contact your dealer." is displayed on the multi-display, update the software of the navigation ECU.

NOTICE:

Click here 2021 - 2024 MY Camry [10/2020 -        ]; NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: PRECAUTION

3. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

Click here 2021 - 2024 MY Camry [10/2020 -        ]; HEATING / AIR CONDITIONING: AIR CONDITIONING PANEL: REMOVAL

4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

Click here 2021 - 2024 MY Camry [10/2020 -        ]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL+

5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 7 Inch Display)

Click here 2021 - 2024 MY Camry [10/2020 -        ]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL+

6. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 9 Inch Display)

Click here 2021 - 2024 MY Camry [10/2020 -        ]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL+

7. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Click here 2021 - 2024 MY Camry [10/2020 -        ]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL+

8. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 7 Inch Display)

(a) Disengage the clamp.

(b) Remove the 4 bolts.

(c) Disengage the 2 clips and 2 claws as shown in the illustration.

Place Hand Here

Remove in this Direction

(d) Disengage the 2 guides as shown in the illustration.

Remove in this Direction

(e) Disconnect each connector and remove the radio and display receiver assembly with bracket.

9. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 9 Inch Display)

(a) Disengage the clamp.

(b) Remove the 4 bolts.

(c) Disengage the 5 clips as shown in the illustration.

Place Hand Here

Remove in this Direction

(d) Disengage the 2 guides as shown in the illustration.

Remove in this Direction

(e) Disconnect each connector and remove the radio and display receiver assembly with bracket.

10. REMOVE CENTER INSTRUMENT CLUSTER FINISH UPPER PANEL ASSEMBLY (for 7 Inch Display)

(a) Disengage the 3 clips to remove the center instrument cluster finish upper panel assembly as shown in the illustration.

Remove in this Direction

11. REMOVE NO. 2 RADIO RECEIVER BRACKET

(a) Remove the 2 screws and No. 2 radio receiver bracket.

12. REMOVE NO. 1 RADIO RECEIVER BRACKET

(a) Remove the 2 screws and No. 1 radio receiver bracket.

13. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY