Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001RJXW
Model Year Start: 2021 Model: Camry Prod Date Range: [10/2020 -           ]
Title: LIGHTING (EXT): HAZARD WARNING SWITCH: INSPECTION; 2021 - 2024 MY Camry [10/2020 -        ]

INSPECTION

PROCEDURE

1. INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

6 (TB) - 3 (E)

Hazard warning signal switch off

10 kΩ or higher

Hazard warning signal switch on

Below 1 Ω

If the result is not as specified, replace the hazard warning signal switch assembly.

*a

Component without harness connected

(Hazard Warning Signal Switch Assembly)

(b) Illumination Inspection

(1) Apply battery voltage to the hazard warning signal switch assembly and check that the switch illuminates.

OK:

Condition

Specified Condition

Battery positive (+) → Terminal 7 (ILL+)

Battery negative (-) → Terminal 2 (ILL-)

Illuminates

If the result is not as specified, replace the hazard warning signal switch assembly.