Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM100000001RIK6 |
Model Year Start: 2021 |
Model: Camry |
Prod Date Range: [10/2020 -
] |
Title: PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: C1AE396; Ultrasonic Sensor (Front Right Center) Component Internal Failure; 2021 - 2024 MY Camry [10/2020 - ] |
DTC
|
C1AE396
|
Ultrasonic Sensor (Front Right Center) Component Internal Failure
|
DESCRIPTION
The front center ultrasonic sensor RH is installed on the front bumper. The clearance warning ECU assembly detects obstacles based on signals it receives from the front center ultrasonic sensor RH. If an open circuit or other malfunction occurs in the front center ultrasonic sensor RH, the front center ultrasonic sensor RH does not operate correctly.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
C1AE396
|
Ultrasonic Sensor (Front Right Center) Component Internal Failure
|
Front center ultrasonic sensor RH failure
|
-
Front center ultrasonic sensor RH
-
Clearance warning ECU assembly
|
CAUTION / NOTICE / HINT
NOTICE:
-
Perform registration after replacing or removing and installing the ultrasonic sensor or clearance warning ECU assembly.
Click here
-
If a DTC is detected again after the repair, turn the ignition switch to ON and turn the intuitive parking assist system ON, and then clear the DTC.
Click here
PROCEDURE
(a) According to the display on the GTS, check for DTCs.
Body Electrical > Clearance Warning > Trouble Codes
(b) According to the display on the GTS, clear the DTCs.
Body Electrical > Clearance Warning > Clear DTCs
(c) Recheck for DTCs.
Body Electrical > Clearance Warning > Trouble Codes
Result
|
Proceed to
|
No DTC is output
|
A
|
"C1AE396" is output
|
B
|
"C1AE396" and "C1AE387" are output
|
C
|
B
|
|
|
2.
|
REPLACE FRONT CENTER ULTRASONIC SENSOR RH
|
(a) Replace the front center ultrasonic sensor RH with a new or normally functioning one.
Click here
HINT:
To check if the ultrasonic sensor is functioning correctly, replace it with another ultrasonic sensor.
NEXT
|
|
|
(a) According to the display on the GTS, check for DTCs.
Body Electrical > Clearance Warning > Trouble Codes
(b) According to the display on the GTS, clear the DTCs.
Body Electrical > Clearance Warning > Clear DTCs
(c) Recheck for DTCs.
Body Electrical > Clearance Warning > Trouble Codes
Result
|
Proceed to
|
No DTC is output
|
A
|
"C1AE396" is output
|
B
|
A |
|
END (FRONT CENTER ULTRASONIC SENSOR RH WAS DEFECTIVE)
|
|