| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001RIJX |
| Model Year Start: 2021 | Model: Camry | Prod Date Range: [10/2020 - ] |
| Title: PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: DATA LIST / ACTIVE TEST; 2021 - 2024 MY Camry [10/2020 - ] | ||
DATA LIST / ACTIVE TEST
DATA LIST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Connect the GTS to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the GTS on.
(d) Enter the following menus: Body Electrical / Clearance Warning / Data List.
(e) Read the Data List according to the display on the GTS.
Body Electrical > Clearance Warning > Data List
|
Tester Display |
Measurement Item |
Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Total Distance Traveled |
Total distance traveled |
1 to 999999 |
Same as actual total distance traveled |
For the unit, refer to "Total Distance Traveled - Unit" |
|
Total Distance Traveled - Unit |
Total Distance Traveled - Unit |
Km/mile |
km |
- |
|
PKSA (O) Equipped Information |
Intuitive parking assist (static objects) function installation information |
Without/With/Unknown |
Without: Without intuitive parking assist (static objects) function With: With intuitive parking assist (static objects) function Unknown: Unknown |
- |
|
PKSB (O) Equipped Information |
Parking Support Brake (static objects) function installation information |
Without/With/Unknown |
Without: Without parking support brake (static objects) function With: With parking support brake (static objects) function Unknown: Unknown |
- |
|
PKSB (V) Equipped Information |
Parking Support Brake (rear crossing vehicles) function installation information |
Without/With/Unknown |
Without: Without parking support brake (rear crossing vehicles) function With: With parking support brake (rear crossing vehicles) function Unknown: Unknown |
- |
|
PKSB (P) Equipped Information |
Parking Support Brake (rear pedestrians) function installation information |
Without/With/Unknown |
Without: Without parking support brake (rear pedestrians) function With: With parking support brake (rear pedestrians) function Unknown: Unknown |
- |
|
Parking Signal |
Shift position P input signal |
ON/OFF |
ON: Shift position in P OFF: Shift position not in P |
- |
|
Reverse Signal |
Shift position R input signal |
ON/OFF |
ON: Shift position in R OFF: Shift position not in R |
- |
|
Vehicle Information (Steering Wheel Position) |
Steering wheel installation location |
Right/Left/Unknown |
Right: RHD Left: LHD Unknown: Steering wheel information not determined |
- |
|
PKSA (O) Center Display Indication Control Rear Camera |
Parking support alert (static objects) function center display control-equipped rear camera connection information |
Not connected/Connected |
Not connected: No camera connection history Connected: Camera connection history |
- |
|
PKSA (O) Main Switch |
Intuitive parking assist system signals |
ON/OFF |
ON: Intuitive parking assist system on OFF: Intuitive parking assist system off |
- |
|
Ultrasonic Sensor (Front Left Center) Information |
Detection range of the ultrasonic sensor |
Not Displayed/Obstacle Detection Close/Obstacle Detection Middle/Obstacle Detection Far/Obstacle Detection Farthest/Obstacle Detection Most Close/Temporary Malfunction/Malfunction/Normal |
Not Displayed: No detection Obstacle Detection Close: Close distance detection Obstacle Detection Middle: Medium distance detection Obstacle Detection Far: Long distance detection Obstacle Detection Farthest: Longest-range detection Obstacle Detection Most Close: Closest-range detection Temporary malfunction: Foreign matter attached to sensor resulting in temporary malfunction Malfunction: Sensor system malfunction Normal: System enabled |
- |
|
Ultrasonic Sensor (Front Right Center) Information |
Detection range of the ultrasonic sensor |
Not Displayed/Obstacle Detection Close/Obstacle Detection Middle/Obstacle Detection Far/Obstacle Detection Farthest/Obstacle Detection Most Close/Temporary Malfunction/Malfunction/Normal |
Not Displayed: No detection Obstacle Detection Close: Close distance detection Obstacle Detection Middle: Medium distance detection Obstacle Detection Far: Long distance detection Obstacle Detection Farthest: Longest-range detection Obstacle Detection Most Close: Closest-range detection Temporary malfunction: Foreign matter attached to sensor resulting in temporary malfunction Malfunction: Sensor system malfunction Normal: System enabled |
- |
|
Ultrasonic Sensor (Front Left Corner) Information |
Detection range of the ultrasonic sensor |
Not Displayed/Obstacle Detection Close/Obstacle Detection Middle/Obstacle Detection Far/Obstacle Detection Farthest/Obstacle Detection Most Close/Temporary Malfunction/Malfunction/Normal |
Not Displayed: No detection Obstacle Detection Close: Close distance detection Obstacle Detection Middle: Medium distance detection Obstacle Detection Far: Long distance detection Obstacle Detection Farthest: Longest-range detection Obstacle Detection Most Close: Closest-range detection Temporary malfunction: Foreign matter attached to sensor resulting in temporary malfunction Malfunction: Sensor system malfunction Normal: System enabled |
- |
|
Ultrasonic Sensor (Front Right Corner) Information |
Detection range of the ultrasonic sensor |
Not Displayed/Obstacle Detection Close/Obstacle Detection Middle/Obstacle Detection Far/Obstacle Detection Farthest/Obstacle Detection Most Close/Temporary Malfunction/Malfunction/Normal |
Not Displayed: No detection Obstacle Detection Close: Close distance detection Obstacle Detection Middle: Medium distance detection Obstacle Detection Far: Long distance detection Obstacle Detection Farthest: Longest-range detection Obstacle Detection Most Close: Closest-range detection Temporary malfunction: Foreign matter attached to sensor resulting in temporary malfunction Malfunction: Sensor system malfunction Normal: System enabled |
- |
|
Ultrasonic Sensor (Rear Left Center) Information |
Detection range of the ultrasonic sensor |
Not Displayed/Obstacle Detection Close/Obstacle Detection Middle/Obstacle Detection Far/Obstacle Detection Farthest/Obstacle Detection Most Close/Temporary Malfunction/Malfunction/Normal |
Not Displayed: No detection Obstacle Detection Close: Close distance detection Obstacle Detection Middle: Medium distance detection Obstacle Detection Far: Long distance detection Obstacle Detection Farthest: Longest-range detection Obstacle Detection Most Close: Closest-range detection Temporary malfunction: Foreign matter attached to sensor resulting in temporary malfunction Malfunction: Sensor system malfunction Normal: System enabled |
- |
|
Ultrasonic Sensor (Rear Right Center) Information |
Detection range of the ultrasonic sensor |
Not Displayed/Obstacle Detection Close/Obstacle Detection Middle/Obstacle Detection Far/Obstacle Detection Farthest/Obstacle Detection Most Close/Temporary Malfunction/Malfunction/Normal |
Not Displayed: No detection Obstacle Detection Close: Close distance detection Obstacle Detection Middle: Medium distance detection Obstacle Detection Far: Long distance detection Obstacle Detection Farthest: Longest-range detection Obstacle Detection Most Close: Closest-range detection Temporary malfunction: Foreign matter attached to sensor resulting in temporary malfunction Malfunction: Sensor system malfunction Normal: System enabled |
- |
|
Ultrasonic Sensor (Rear Left Corner) Information |
Detection range of the ultrasonic sensor |
Not Displayed/Obstacle Detection Close/Obstacle Detection Middle/Obstacle Detection Far/Obstacle Detection Farthest/Obstacle Detection Most Close/Temporary Malfunction/Malfunction/Normal |
Not Displayed: No detection Obstacle Detection Close: Close distance detection Obstacle Detection Middle: Medium distance detection Obstacle Detection Far: Long distance detection Obstacle Detection Farthest: Longest-range detection Obstacle Detection Most Close: Closest-range detection Temporary malfunction: Foreign matter attached to sensor resulting in temporary malfunction Malfunction: Sensor system malfunction Normal: System enabled |
- |
|
Ultrasonic Sensor (Rear Right Corner) Information |
Detection range of the ultrasonic sensor |
Not Displayed/Obstacle Detection Close/Obstacle Detection Middle/Obstacle Detection Far/Obstacle Detection Farthest/Obstacle Detection Most Close/Temporary Malfunction/Malfunction/Normal |
Not Displayed: No detection Obstacle Detection Close: Close distance detection Obstacle Detection Middle: Medium distance detection Obstacle Detection Far: Long distance detection Obstacle Detection Farthest: Longest-range detection Obstacle Detection Most Close: Closest-range detection Temporary malfunction: Foreign matter attached to sensor resulting in temporary malfunction Malfunction: Sensor system malfunction Normal: System enabled |
- |
|
Bumper Type |
Registered bumper type |
Unknown/1/2 |
Unknown: Not registered 1: Standard type 2: Sport package |
- |
|
Adjustment Mode |
Adjustment mode |
Normal mode/Dealer mode |
Normal mode: Not dealer adjustment mode Dealer mode: Dealer adjustment mode |
- |
|
Ultrasonic Sensor (Front Center) Detection Range |
Ultrasonic sensor (front center) detection range |
Close/Far |
Customized setting |
- |
|
Ultrasonic Sensor (Front Corner) Detection Range |
Ultrasonic sensor (front corner) detection range |
Close/Far |
Customized setting |
- |
|
Ultrasonic Sensor (Rear Center) Detection Range |
Ultrasonic sensor (rear center) detection range |
Close/Far |
Customized setting |
- |
|
Ultrasonic Sensor (Rear Corner) Detection Range |
Ultrasonic sensor (rear corner) detection range |
Close/Far |
Customized setting |
- |
|
Clearance Warning Buzzer Volume |
Volume setting of the clearance warning buzzer |
Volume 1/Volume 2/Volume 3 |
Customized setting |
- |
|
PKSA (O) Forward Detection Image Display |
Detection status display setting for the parking support alert (static objects) function, when an obstacle is detected while driving the vehicle forward |
Display/Not display |
Customized setting |
- |
|
Ultrasonic Sensor Actuation (Shift N) |
Operation ON/OFF setting for the ultrasonic sensor when shift position is in N |
OFF/ON |
Customized setting |
- |
|
PKSA (O) Switch State Stored |
Intuitive parking assist system switch state stored function |
Not Stored/Stored |
Customized setting |
- |
|
PKSA (O) Judgment of Obstacle on Course |
Displays the automatic mute ON judgment setting under automatic mute conditions for the intuitive parking assist function automatic mute function |
Valid/Invalid |
Customized setting |
- |
|
PKSA (O) Auto Mute Function |
Function to display objects as defined in the automatic mute settings when the intuitive parking assist conditions are met |
OFF/ON |
Customized setting |
- |
|
PKSA (O) Image Display when Away from the Obstacle |
Function to display detected objects when the vehicle is moving away from the objects |
Hide/Display |
Customized setting |
- |
|
Voice Guidance Function |
ON/OFF setting for the voice guidance function |
OFF/ON |
Customized setting |
- |
|
Front Buzzer |
Status of the No. 1 clearance warning buzzer |
OFF/ON |
ON: Buzzer sounds OFF: Buzzer does not sound |
- |
|
Software Inconsistency with Body Control Module |
Main body ECU (multiplex network body ECU) specification information mismatch |
NO/YES |
NO: Specification information match YES: Specification information mismatch |
RoB X2603 is output if YES |
|
Software Inconsistency with Rear Side Rader Sensor |
Blind spot monitor sensor specification information mismatch |
NO/YES |
NO: Specification information match YES: Specification information mismatch |
RoB X2623 is output if YES |
|
Software Inconsistency with Rear Camera |
Rear television camera assembly specification information mismatch |
NO/YES |
NO: Specification information match YES: Specification information mismatch |
RoB X2621 is output if YES |
|
Memorizing Vehicle Information Not Programmed |
Vehicle specification not written |
Complete/Incomplete |
Complete: Vehicle specification writing complete Incomplete: Vehicle specification writing incomplete |
RoB X2617 is output if Incomplete |
|
Ultrasonic Sensor (Front) ID Not Registered |
Ultrasonic sensor (front) ID registration status |
Registered/Not Registered |
Registered: ID registered Not registered: ID not registered |
RoB X20C0 is output if Not registered |
|
Ultrasonic Sensor (Rear) ID Not Registered |
Ultrasonic sensor (rear) ID registration status |
Registered/Not Registered |
Registered: ID registered Not registered: ID not registered |
RoB X20C1 is output if Not registered |
|
Clearance Warning ECU Low Voltage |
Low voltage for clearance warning ECU assembly |
Normal/Low Voltage |
Normal: Clearance warning ECU assembly voltage normal Low voltage: Clearance warning ECU assembly voltage malfunction |
RoB X20DE is output if Low voltage |
|
Shift Position Invalid |
Shift position |
Normal/Invalid |
Normal: Shift position normal Invalid: Shift position malfunction |
RoB X20DF is output if Invalid |
|
Ultrasonic Sensor (Front Right Center) Temporarily Unavailable - Circuit Open |
Open circuit status of the ultrasonic sensor |
NO/YES |
NO: No sensor open circuit YES: Sensor open circuit |
RoB X20C4 is output if YES |
|
Ultrasonic Sensor (Front Right Center) Temporarily Unavailable - Freeze/Dirt |
Frozen/dirty status of the ultrasonic sensor |
NO/YES |
NO: Sensor not frozen/dirty YES: Sensor frozen/dirty |
RoB X20C4 is output if YES |
|
Ultrasonic Sensor (Front Right Center) Temporarily Unavailable - Foreign Material Fixing |
Foreign matter stuck status of the ultrasonic sensor |
NO/YES |
NO: Foreign matter not stuck on sensor YES: Foreign matter stuck on sensor |
RoB X20C4 is output if YES |
|
Ultrasonic Sensor (Front Right Center) Temporarily Unavailable - Parameter Malfunction |
Parameter malfunction status of the ultrasonic sensor |
NO/YES |
NO: No sensor parameter malfunction YES: Sensor parameter malfunction |
RoB X20C4 is output if YES |
|
Ultrasonic Sensor (Front Right Center) Temporarily Unavailable - Flowing Water Continuously |
Continuous flowing water status of the ultrasonic sensor |
NO/YES |
NO: No sensor continuous flowing water YES: Sensor continuous flowing water |
RoB X20C4 is output if YES |
|
Ultrasonic Sensor (Front Left Center) Temporarily Unavailable - Circuit Open |
Open circuit status of the ultrasonic sensor |
NO/YES |
NO: No sensor open circuit YES: Sensor open circuit |
RoB X20C5 is output if YES |
|
Ultrasonic Sensor (Front Left Center) Temporarily Unavailable - Freeze/Dirt |
Frozen/dirty status of the ultrasonic sensor |
NO/YES |
NO: Sensor not frozen/dirty YES: Sensor frozen/dirty |
RoB X20C5 is output if YES |
|
Ultrasonic Sensor (Front Left Center) Temporarily Unavailable - Foreign Material Fixing |
Foreign matter stuck status of the ultrasonic sensor |
NO/YES |
NO: Foreign matter not stuck on sensor YES: Foreign matter stuck on sensor |
RoB X20C5 is output if YES |
|
Ultrasonic Sensor (Front Left Center) Temporarily Unavailable - Parameter Malfunction |
Parameter malfunction status of the ultrasonic sensor |
NO/YES |
NO: No sensor parameter malfunction YES: Sensor parameter malfunction |
RoB X20C5 is output if YES |
|
Ultrasonic Sensor (Front Left Center) Temporarily Unavailable - Flowing Water Continuously |
Continuous flowing water status of the ultrasonic sensor |
NO/YES |
NO: No sensor continuous flowing water YES: Sensor continuous flowing water |
RoB X20C5 is output if YES |
|
Ultrasonic Sensor (Front Right Corner) Temporarily Unavailable - Circuit Open |
Open circuit status of the ultrasonic sensor |
NO/YES |
NO: No sensor open circuit YES: Sensor open circuit |
RoB X20C6 is output if YES |
|
Ultrasonic Sensor (Front Right Corner) Temporarily Unavailable - Freeze/Dirt |
Frozen/dirty status of the ultrasonic sensor |
NO/YES |
NO: Sensor not frozen/dirty YES: Sensor frozen/dirty |
RoB X20C6 is output if YES |
|
Ultrasonic Sensor (Front Right Corner) Temporarily Unavailable - Foreign Material Fixing |
Foreign matter stuck status of the ultrasonic sensor |
NO/YES |
NO: Foreign matter not stuck on sensor YES: Foreign matter stuck on sensor |
RoB X20C6 is output if YES |
|
Ultrasonic Sensor (Front Right Corner) Temporarily Unavailable - Parameter Malfunction |
Parameter malfunction status of the ultrasonic sensor |
NO/YES |
NO: No sensor parameter malfunction YES: Sensor parameter malfunction |
RoB X20C6 is output if YES |
|
Ultrasonic Sensor (Front Right Corner) Temporarily Unavailable - Flowing Water Continuously |
Continuous flowing water status of the ultrasonic sensor |
NO/YES |
NO: No sensor continuous flowing water YES: Sensor continuous flowing water |
RoB X20C6 is output if YES |
|
Ultrasonic Sensor (Front Left Corner) Temporarily Unavailable - Circuit Open |
Open circuit status of the ultrasonic sensor |
NO/YES |
NO: No sensor open circuit YES: Sensor open circuit |
RoB X20C7 is output if YES |
|
Ultrasonic Sensor (Front Left Corner) Temporarily Unavailable - Freeze/Dirt |
Frozen/dirty status of the ultrasonic sensor |
NO/YES |
NO: Sensor not frozen/dirty YES: Sensor frozen/dirty |
RoB X20C7 is output if YES |
|
Ultrasonic Sensor (Front Left Corner) Temporarily Unavailable - Foreign Material Fixing |
Foreign matter stuck status of the ultrasonic sensor |
NO/YES |
NO: Foreign matter not stuck on sensor YES: Foreign matter stuck on sensor |
RoB X20C7 is output if YES |
|
Ultrasonic Sensor (Front Left Corner) Temporarily Unavailable - Parameter Malfunction |
Parameter malfunction status of the ultrasonic sensor |
NO/YES |
NO: No sensor parameter malfunction YES: Sensor parameter malfunction |
RoB X20C7 is output if YES |
|
Ultrasonic Sensor (Front Left Corner) Temporarily Unavailable - Flowing Water Continuously |
Continuous flowing water status of the ultrasonic sensor |
NO/YES |
NO: No sensor continuous flowing water YES: Sensor continuous flowing water |
RoB X20C7 is output if YES |
|
Ultrasonic Sensor (Rear Right Center) Temporarily Unavailable - Circuit Open |
Open circuit status of the ultrasonic sensor |
NO/YES |
NO: No sensor open circuit YES: Sensor open circuit |
RoB X20C8 is output if YES |
|
Ultrasonic Sensor (Rear Right Center) Temporarily Unavailable - Freeze/Dirt |
Frozen/dirty status of the ultrasonic sensor |
NO/YES |
NO: Sensor not frozen/dirty YES: Sensor frozen/dirty |
RoB X20C8 is output if YES |
|
Ultrasonic Sensor (Rear Right Center) Temporarily Unavailable - Foreign Material Fixing |
Foreign matter stuck status of the ultrasonic sensor |
NO/YES |
NO: Foreign matter not stuck on sensor YES: Foreign matter stuck on sensor |
RoB X20C8 is output if YES |
|
Ultrasonic Sensor (Rear Right Center) Temporarily Unavailable - Foreign Material Fixing (Curl Up) |
Foreign matter stuck (curl up) status of the ultrasonic sensor |
NO/YES |
NO: Foreign matter not stuck (curl up) on sensor YES: Foreign matter stuck (curl up) on sensor |
RoB X20C8 is output if YES |
|
Ultrasonic Sensor (Rear Right Center) Temporarily Unavailable - Parameter Malfunction |
Parameter malfunction status of the ultrasonic sensor |
NO/YES |
NO: No sensor parameter malfunction YES: Sensor parameter malfunction |
RoB X20C8 is output if YES |
|
Ultrasonic Sensor (Rear Right Center) Temporarily Unavailable - Flowing Water Continuously |
Continuous flowing water status of the ultrasonic sensor |
NO/YES |
NO: No sensor continuous flowing water YES: Sensor continuous flowing water |
RoB X20C8 is output if YES |
|
Ultrasonic Sensor (Rear Left Center) Temporarily Unavailable - Circuit Open |
Open circuit status of the ultrasonic sensor |
NO/YES |
NO: No sensor open circuit YES: Sensor open circuit |
RoB X20C9 is output if YES |
|
Ultrasonic Sensor (Rear Left Center) Temporarily Unavailable - Freeze/Dirt |
Frozen/dirty status of the ultrasonic sensor |
NO/YES |
NO: Sensor not frozen/dirty YES: Sensor frozen/dirty |
RoB X20C9 is output if YES |
|
Ultrasonic Sensor (Rear Left Center) Temporarily Unavailable - Foreign Material Fixing |
Foreign matter stuck status of the ultrasonic sensor |
NO/YES |
NO: Foreign matter not stuck on sensor YES: Foreign matter stuck on sensor |
RoB X20C9 is output if YES |
|
Ultrasonic Sensor (Rear Left Center) Temporarily Unavailable - Foreign Material Fixing (Curl Up) |
Foreign matter stuck (curl up) status of the ultrasonic sensor |
NO/YES |
NO: Foreign matter not stuck (curl up) on sensor YES: Foreign matter stuck (curl up) on sensor |
RoB X20C9 is output if YES |
|
Ultrasonic Sensor (Rear Left Center) Temporarily Unavailable - Parameter Malfunction |
Parameter malfunction status of the ultrasonic sensor |
NO/YES |
NO: No sensor parameter malfunction YES: Sensor parameter malfunction |
RoB X20C9 is output if YES |
|
Ultrasonic Sensor (Rear Left Center) Temporarily Unavailable - Flowing Water Continuously |
Continuous flowing water status of the ultrasonic sensor |
NO/YES |
NO: No sensor continuous flowing water YES: Sensor continuous flowing water |
RoB X20C9 is output if YES |
|
Ultrasonic Sensor (Rear Right Corner) Temporarily Unavailable - Circuit Open |
Open circuit status of the ultrasonic sensor |
NO/YES |
NO: No sensor open circuit YES: Sensor open circuit |
RoB X20CA is output if YES |
|
Ultrasonic Sensor (Rear Right Corner) Temporarily Unavailable - Freeze/Dirt |
Frozen/dirty status of the ultrasonic sensor |
NO/YES |
NO: Sensor not frozen/dirty YES: Sensor frozen/dirty |
RoB X20CA is output if YES |
|
Ultrasonic Sensor (Rear Right Corner) Temporarily Unavailable - Foreign Material Fixing |
Foreign matter stuck status of the ultrasonic sensor |
NO/YES |
NO: Foreign matter not stuck on sensor YES: Foreign matter stuck on sensor |
RoB X20CA is output if YES |
|
Ultrasonic Sensor (Rear Right Corner) Temporarily Unavailable - Foreign Material Fixing (Curl Up) |
Foreign matter stuck (curl up) status of the ultrasonic sensor |
NO/YES |
NO: Foreign matter not stuck (curl up) on sensor YES: Foreign matter stuck (curl up) on sensor |
RoB X20CA is output if YES |
|
Ultrasonic Sensor (Rear Right Corner) Temporarily Unavailable - Parameter Malfunction |
Parameter malfunction status of the ultrasonic sensor |
NO/YES |
NO: No sensor parameter malfunction YES: Sensor parameter malfunction |
RoB X20CA is output if YES |
|
Ultrasonic Sensor (Rear Right Corner) Temporarily Unavailable - Flowing Water Continuously |
Continuous flowing water status of the ultrasonic sensor |
NO/YES |
NO: No sensor continuous flowing water YES: Sensor continuous flowing water |
RoB X20CA is output if YES |
|
Ultrasonic Sensor (Rear Left Corner) Temporarily Unavailable - Circuit Open |
Open circuit status of the ultrasonic sensor |
NO/YES |
NO: No sensor open circuit YES: Sensor open circuit |
RoB X20CB is output if YES |
|
Ultrasonic Sensor (Rear Left Corner) Temporarily Unavailable - Freeze/Dirt |
Frozen/dirty status of the ultrasonic sensor |
NO/YES |
NO: Sensor not frozen/dirty YES: Sensor frozen/dirty |
RoB X20CB is output if YES |
|
Ultrasonic Sensor (Rear Left Corner) Temporarily Unavailable - Foreign Material Fixing |
Foreign matter stuck status of the ultrasonic sensor |
NO/YES |
NO: Foreign matter not stuck on sensor YES: Foreign matter stuck on sensor |
RoB X20CB is output if YES |
|
Ultrasonic Sensor (Rear Left Corner) Temporarily Unavailable - Foreign Material Fixing (Curl Up) |
Foreign matter stuck status of the ultrasonic sensor |
NO/YES |
NO: Foreign matter not stuck (curl up) on sensor YES: Foreign matter stuck (curl up) on sensor |
RoB X20CB is output if YES |
|
Ultrasonic Sensor (Rear Left Corner) Temporarily Unavailable - Parameter Malfunction |
Parameter malfunction status of the ultrasonic sensor |
NO/YES |
NO: No sensor parameter malfunction YES: Sensor parameter malfunction |
RoB X20CB is output if YES |
|
Ultrasonic Sensor (Rear Left Corner) Temporarily Unavailable - Flowing Water Continuously |
Continuous flowing water status of the ultrasonic sensor |
NO/YES |
NO: No sensor continuous flowing water YES: Sensor continuous flowing water |
RoB X20CB is output if YES |
|
Steering Angle Sensor Malfunction |
Steering angle sensor internal malfunction |
NO/YES |
NO: Steering angle sensor normal YES: Steering angle sensor malfunction |
RoB X2001 is output if YES |
|
Engine Control Module Malfunction |
Powertrain system malfunction |
NO/YES |
NO: EFI system normal YES: EFI system malfunction |
RoB X2087 is output if YES |
|
Brake Control System Malfunction |
Brake system malfunction |
NO/YES |
NO: Electronically controlled brake system normal YES: Electronically controlled brake system malfunction |
RoB X2003 is output if YES |
|
Acceleration Sensor Malfunction |
Acceleration sensor system malfunction |
NO/YES |
NO: Electronically controlled brake system normal YES: Electronically controlled brake system malfunction |
RoB X204A is output if YES |
|
Rear Side Radar Sensor Malfunction |
Blind spot monitor malfunction |
NO/YES |
NO: Blind spot monitor system normal YES: Blind spot monitor system malfunction |
RoB X2038 is output if YES |
|
Rear Side Radar Sensor Temporarily Unavailable |
Blind spot monitor malfunction |
NO/YES |
NO: Blind spot monitor system normal YES: Blind spot monitor system temporarily unavailable |
RoB X203A is output if YES |
|
Ambient Temperature Sensor Circuit |
Ambient temperature sensor malfunction |
NO/YES |
NO: Air conditioning system normal YES: Air conditioning system malfunction |
RoB X2077 is output if YES |
|
Communication Error from Clearance Warning Control Module to Brake Control Module |
Brake system communication malfunction |
NO/YES |
NO: Electronically controlled brake system normal YES: Electronically controlled brake system malfunction |
RoB X20D5 is output if YES |
ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the GTS to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the GTS on.
(d) Enter the following menus: Body Electrical / Clearance Warning / Active Test.
(e) According to the display on the GTS, perform the Active Test.
Body Electrical > Clearance Warning > Active Test
|
Tester Display |
Measurement Item |
Control Range |
|---|---|---|
|
Front Buzzer |
Sounding of No. 1 clearance warning buzzer |
ON/OFF |
|
|