Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001RIGI
Model Year Start: 2021 Model: Camry Prod Date Range: [10/2020 -           ]
Title: PARK ASSIST / MONITORING: PARKING SUPPORT BRAKE SYSTEM: U010087,U012587,U012687,U012987,U014087,U015587,U016487,U023387; Lost Communication With ECM/PCM "A" Missing Message; 2021 - 2024 MY Camry [10/2020 -        ]

DTC

U010087

Lost Communication With ECM/PCM "A" Missing Message

DTC

U012587

Lost Communication With Multi-axis Acceleration Sensor Module Missing Message

DTC

U012687

Lost Communication with Steering Angle Sensor Module Missing Message

DTC

U012987

Lost Communication With Brake System Control Module Missing Message

DTC

U014087

Lost Communication with Body Control Module Missing Message

DTC

U015587

Lost Communication with Instrument Panel Cluster (IPC) Control Module

DTC

U016487

Lost Communication with HVAC Control Module Missing Message

DTC

U023387

Lost Communication with Side Obstacle Detection Control Module "B" Missing Message

DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the clearance warning ECU assembly.

HINT:

If CAN communication system DTCs are stored, they may also be stored in other systems.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

U010087

Lost Communication With ECM/PCM "A" Missing Message

Lost communication with ECM

CAN communication system

U012587

Lost Communication With Multi-axis Acceleration Sensor Module Missing Message

Lost communication with yaw rate sensor (airbag sensor assembly)

CAN communication system

U012687

Lost Communication with Steering Angle Sensor Module Missing Message

Lost communication with steering sensor

CAN communication system

U012987

Lost Communication With Brake System Control Module Missing Message

Lost communication with skid control ECU (brake actuator assembly)

CAN communication system

U014087

Lost Communication with Body Control Module Missing Message

Lost communication with main body ECU (multiplex network body ECU)

CAN communication system

U015587

Lost Communication with Instrument Panel Cluster (IPC) Control Module

Lost communication with combination meter assembly

CAN communication system

U016487

Lost Communication with HVAC Control Module Missing Message

Lost communication with air conditioning amplifier assembly

CAN communication system

U023387

Lost Communication with Side Obstacle Detection Control Module "B" Missing Message

Lost communication with blind spot monitor sensor

CAN communication system

PROCEDURE

1.

CHECK DTC OUTPUT

(a) Using the GTS, check for DTCs according to the prompts on the screen.

HINT:

After turning the ignition switch from off to ON, wait 10 seconds or more before checking for DTCs.

Body Electrical > Clearance Warning > Trouble Codes

(b) Clear the DTCs according to the screen on the GTS.

Body Electrical > Clearance Warning > Clear DTCs

(c) Recheck for DTCs.

Body Electrical > Clearance Warning > Trouble Codes

OK:

No DTCs are output.

HINT:

  • If CAN communication system DTCs are stored, they may also be stored in other systems.
  • If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.
  • If these DTCs are output frequently, duplicate the conditions that caused the problem symptoms and perform troubleshooting again, even though DTCs were not output when rechecking for DTCs.
OK

USE SIMULATION METHOD TO CHECK 2021 MY Camry [10/2020 - 08/2021]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING 2022 - 2024 MY Camry [08/2021 -        ]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING

NG

GO TO CAN COMMUNICATION SYSTEM