HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System): Blower Motor does not Operate; 2021 - 2024 MY Camry [10/2020

Last Modified: 11-20-2023	6.11:8.1.0	Doc ID: RM100000001R3ZC
Model Year Start: 2021	Model: Camry	Prod Date Range: [10/2020 - ]
Title: HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System): Blower Motor does not Operate; 2021 - 2024 MY Camry [10/2020 - ]

Blower Motor does not Operate

DESCRIPTION

If air does not flow from the front registers after the blower switch on the air conditioning control assembly is operated, the following suspected areas may be the cause.

Symptom	Factor
No air flows from the registers	Air conditioning amplifier assembly malfunction Blower motor with fan sub-assembly malfunction Air conditioning control assembly malfunction Clogged clean air filter Clogged No. 1 evaporator sub-assembly or heater radiator unit sub-assembly fins

PROCEDURE

1.	CHECK AIR CONDITIONING SYSTEM (MANUAL MODE)

(a) Turn off the AUTO switch, operate the blower switch and check that the blower motor with fan sub-assembly can be operated manually.

OK:

The blower motor with fan sub-assembly operates normally.

GO TO OTHER DIAGNOSIS PROCEDURE (Blower Motor Circuit)

2.	READ VALUE USING TECHSTREAM

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(d) Enter the following menus: Powertrain / Engine / Data List.

(e) Read the Data List according to the display on the Techstream.

Powertrain > Engine > Data List

Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
Coolant Temperature	Engine coolant temperature	Min.: -40°C (-40°F), Max.: 140°C (284°F)	75 to 100°C (167 to 212°F): After warming up	This is the engine coolant temperature. HINT: After warming up the engine, the engine coolant temperature will be 75 to 100°C (167 to 212°F). After a long soak, the engine coolant temperature, intake air temperature and ambient air temperature will be approximately equal. If the value is -40°C (-40°F), or higher than 135°C (275°F), the sensor circuit is open or shorted. Check if the engine overheats if the value indicated is higher than 135°C (275°F).

Powertrain > Engine > Data List

Tester Display
Coolant Temperature

OK:

After warming up the engine, the temperature value displayed is within the range specified in the normal condition column.

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

GO TO COOLING SYSTEM

for A25A-FKS: Click here

for 2GR-FKS: Click here