| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001N5I2 |
| Model Year Start: 2020 | Model: Camry | Prod Date Range: [03/2020 - ] |
| Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: REAR SPEED SENSOR (for AWD): INSTALLATION; 2020 - 2024 MY Camry [03/2020 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. INSTALL REAR SKID CONTROL SENSOR
(a) Install the rear skid control sensor to the rear axle carrier sub-assembly with the bolt.
Torque:
8.5 N·m {87 kgf·cm, 75 in·lbf}
NOTICE:
- Keep the tip of the rear skid control sensor and installation hole free of foreign matter.
- Firmly insert the rear skid control sensor body into the rear axle carrier sub-assembly before tightening the bolt.
- After installing the rear skid control sensor to the rear axle carrier sub-assembly, make sure that there is no clearance between the rear skid control sensor stay and rear axle carrier sub-assembly. Also make sure that no foreign matter is stuck between the parts.
(b) Connect the No. 2 parking brake wire assembly connector to the rear skid control sensor.
2. INSTALL REAR WHEEL
Click here
![2018 - 2024 MY Camry [06/2017 - ]; MAINTENANCE: TIRE AND WHEEL: INSTALLATION](/t3Portal/stylegraphics/info.gif)
3. CHECK FOR SPEED SENSOR SIGNAL
Click here
|
|