Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM100000001MQ4L |
Model Year Start: 2020 |
Model: Camry |
Prod Date Range: [03/2020 - 10/2020] |
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM (w/ Electric Parking Brake System): ABS Operates Before Necessary When Braking; 2020 MY Camry [03/2020 - 10/2020] |
ABS Operates Before Necessary When Braking
|
DESCRIPTION
Troubleshooting for when ABS operates too soon due to a noisy signal from the speed sensor, a difference in output, etc.
PROCEDURE
1.
|
PERFORM TEST MODE (SIGNAL CHECK) INSPECTION (SPEED SENSOR CIRCUIT)
|
(a) Enter the following menus: Chassis / ABS/VSC/TRAC/EPB / Utility / Signal Check.
(b) Using the Techstream, perform a Test Mode (Signal Check) inspection sensor check and check that speed sensor Test Mode (Signal Check) inspection items change from incomplete to complete.
Click here
Chassis > ABS/VSC/TRAC/EPB > Utility
Tester Display
|
Signal Check
|
OK:
Speed sensor Test Mode (Signal Check) inspection items change from incomplete to complete.
Result
|
Proceed to
|
OK (for Front)
|
A
|
OK (for Rear (for 2WD))
|
B
|
OK (for Rear (for AWD))
|
C
|
NG
|
D
|
NOTICE:
-
When cleaning the front speed sensor and rear speed sensor (for AWD), make sure to clean the installation hole before installation.
-
Do not use parts cleaner when cleaning the front speed sensor rotor and rear speed sensor rotor (for AWD).
HINT:
The rear speed sensor and rear speed sensor rotor are incorporated into the rear axle hub and bearing assembly. (for 2WD)
If the rear speed sensor and rear speed sensor rotor need to be replaced, replace the rear axle hub and bearing assembly. (for 2WD)
A |
|
CLEAN FRONT SPEED SENSOR AND FRONT SPEED SENSOR ROTOR
|
C |
|
CLEAN REAR SPEED SENSOR AND REAR SPEED SENSOR ROTOR
|
D |
|
INSPECT AND REPAIR MALFUNCTIONING SPEED SENSOR CIRCUIT
|
|