| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001MGFR |
| Model Year Start: 2020 | Model: Camry | Prod Date Range: [03/2020 - ] |
| Title: GF1A (TRANSFER / 4WD / AWD): DYNAMIC TORQUE CONTROL AWD SYSTEM: CALIBRATION; 2020 - 2024 MY Camry [03/2020 - ] | ||
CALIBRATION
NOTICE:
- Initial AWD functions such as acceleration are sometimes affected unless backup memory is cleared.
- When the yaw rate and acceleration sensor (airbag sensor assembly) is replaced, Reset Memory must be performed.
RESET MEMORY
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Enter the following menus: Chassis / Four Wheel Drive / Utility / Reset Memory.
Chassis > Four Wheel Drive > Utility
|
Tester Display |
|---|
|
Reset Memory |
(f) Operate the Techstream to clear the data.
|
|