Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001LBJT
Model Year Start: 2020 Model: Camry Prod Date Range: [09/2019 - 08/2021]
Title: MIRROR (INT): INNER REAR VIEW MIRROR (w/ EC Mirror): REMOVAL; 2020 - 2021 MY Camry [09/2019 - 08/2021]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during inner rear view mirror assembly removal/installation are shown below.

Necessary Procedures After Procedure Performed

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Replacement of inner rear view mirror assembly

Re-registration of codes in the garage door opener system

  • Register transmitter code
  • Rolling code systems

Garage door opener system

2018 - 2024 MY Camry [03/2017 -        ]; GARAGE DOOR OPENER: GARAGE DOOR OPENER SYSTEM: REGISTRATION

PROCEDURE

1. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Pre-collision System)

(a) Disengage the 2 claws and slide the inner rear view mirror stay holder cover as shown in the illustration.

Slide

(b) Disengage the 6 claws to remove the inner rear view mirror stay holder cover as shown in the illustration.

Remove in this Direction

2. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o Pre-collision System)

(a) Disconnect the connector.

(b) Using a T20 "TORX" socket wrench, remove the screw.

(c) Slide the inner rear view mirror assembly as shown in the illustration to remove it.

Remove in this Direction

3. REMOVE NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System)

Click here 2018 - 2020 MY Camry [03/2017 - 10/2020]; CRUISE CONTROL: FRONT CAMERA: REMOVAL+ 2021 - 2024 MY Camry [10/2020 -        ]; CRUISE CONTROL: FRONT CAMERA: REMOVAL+

4. REMOVE NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)

Click here 2018 - 2020 MY Camry [03/2017 - 10/2020]; CRUISE CONTROL: FRONT CAMERA: REMOVAL+ 2021 - 2024 MY Camry [10/2020 -        ]; CRUISE CONTROL: FRONT CAMERA: REMOVAL+

5. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ Pre-collision System)

(a) Disconnect the connector.

(b) Disengage the clamp.

(c) Using a T20 "TORX" socket wrench, remove the screw.

(d) Slide the inner rear view mirror assembly as shown in the illustration to remove it.

Remove in this Direction