Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001LA1O
Model Year Start: 2020 Model: Camry Prod Date Range: [09/2019 - 10/2020]
Title: MIRROR (EXT): OUTER REAR VIEW MIRROR: REMOVAL; 2020 MY Camry [09/2019 - 10/2020]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during outer rear view mirror assembly with cover removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

  • Side television camera assembly LH
  • Outer rear view mirror assembly LH
  • Side television camera assembly RH
  • Outer rear view mirror assembly RH

Side television camera view adjustment

Panoramic view monitor system

2018 - 2020 MY Camry [06/2017 - 10/2020]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: CALIBRATION

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH

Click here 2020 MY Camry [09/2019 - 10/2020]; DOOR / HATCH: FRONT DOOR: DISASSEMBLY+

2. REMOVE FRONT DOOR ARMREST COVER SUB-ASSEMBLY

Click here 2020 MY Camry [09/2019 - 10/2020]; DOOR / HATCH: FRONT DOOR: DISASSEMBLY+

3. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side)

Click here 2020 MY Camry [09/2019 - 10/2020]; DOOR / HATCH: FRONT DOOR: DISASSEMBLY+

4. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side)

Click here 2020 MY Camry [09/2019 - 10/2020]; DOOR / HATCH: FRONT DOOR: DISASSEMBLY+

5. REMOVE FRONT ARMREST ASSEMBLY

Click here 2020 MY Camry [09/2019 - 10/2020]; DOOR / HATCH: FRONT DOOR: DISASSEMBLY+

6. REMOVE FRONT DOOR TRIM PLATE (w/o Courtesy Light)

Click here 2020 MY Camry [09/2019 - 10/2020]; DOOR / HATCH: FRONT DOOR: DISASSEMBLY+

7. REMOVE COURTESY LIGHT ASSEMBLY (w/ Courtesy Light)

Click here 2018 - 2024 MY Camry [03/2017 -        ]; LIGHTING (INT): DOOR COURTESY LIGHT: REMOVAL+

8. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

Click here 2020 MY Camry [09/2019 - 10/2020]; DOOR / HATCH: FRONT DOOR: DISASSEMBLY+

9. REMOVE HOLE PLUG

(a) Remove the hole plug.

10. REMOVE OUTER MIRROR INSTALL HOLE COVER

(a) Disconnect the connector.

(b) Disengage the clamp.

(c) Remove the screw.

(d) Disengage the clip and 2 claws to remove the outer mirror install hole cover.

11. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER

(a) Disengage the clamp.

*a

Clamp

*b

Guide

(b) Remove the 3 nuts.

(c) Disengage the claw and 2 guides and remove the outer rear view mirror assembly with cover.